Caffitaly System Bella Instruction Book - English
4
English
First Use
• The appliance is equipped with a mixer/milk frother insert accessory (consisting of
support + whisk), which is to be used always, whatever the selected operation. Before
using the Milk Frother, we suggest cleaning all parts (see Cleaning & Maintenance).
• Place the appliance on a flat surface.
• Insert the plug in a power socket. The appliance will beep.
• Remove the lid and place the mixer/frother insert inside the container (jug).
• Fill the container (jug) with the recommended amount of milk, refit the lid, and place the
container (jug) back into the base.
Note
: For better froth, use milk straight from the refrigerator (approx. 3-5°C)
The appliance can be used for the following operations:
• Latte - press the latte button .
• Cappuccino - press the cappuccino button .
• Hot Milk - press the hot milk button .
Alarms
The appliance has the Latte (white LED) , Cappuccino (white LED) buttons lit up at the
same time, as shown in figure 1, when:
• Any button is pressed and the milk container is not in the base.
• Any button is pressed and there is no milk in the container.
• Any button is pressed and the milk frother insert is not inside the container.
• The milk container is removed from the base when the cycle has not finished.
Important note: To reset the alarm and return to operation status, press any button twice.
Frothing - Latte Setting
• Fill the container (jug) with the required amount of milk, refit the lid, and place the container
(jug) back into the base.
Note
: To prevent milk overflowing after being frothed, the recommended maximum amount of
milk must be below marked
max milk (250 mL)
.
• Press the Latte button , the appliance will beep, the Latte button will light up white and
the appliance will start. When the required temperature is reached, the appliance will stop,
beep and all buttons will light up.
Note
: Do not remove the milk container (jug) during normal operation. If you do need to stop
the normal cycle in advance, press the Latte button
once
.
Note
: During the Latte mode operation, the Cappuccino and Hot Milk buttons are locked.
• When the appliance has completed its cycle, remove the container (jug), also remove the
mixer/frother insert and pour the hot frothed milk.
• Always switch the appliance off and disconnect it from the power supply when not in use.
Note
: We recommend cleaning any residual milk from the appliance after each use, to
safeguard health and prevent malfunctioning.