Webmux™ model 690pg installation guide version 9.0.X.
Copyright© 1997-2012 cai networks, inc. The information contained in this document is the property of cai networks, inc. Neither receipt nor possession hereof confers or transfers any right to reproduce or disclose any part of the contents hereof, without the prior written consent of cai networks, i...
- i - table of contents packing list ..................................................................................................................................... Ii section 1 main components .......................................................................................................
- ii - packing list • one (1) webmux unit • two (2) power cord • one (1) webmux user manual • one (1) webmux 690pg installation guide • one (1) warranty registration card.
- 3 - section 1 main components 1.1 front view 1.1.1 toggle power switch this switch toggles power on. To force power off, the switch must be pressed and held for 5 seconds. However, it is not recommended to use this power switch to shut down the unit. Please use the lcd panel, web interface, or com...
- 4 - 1.2 rear view 1.2.1 redundant power supply webmux 690pg has a redundant dual power supply. 1.2.2 backup webmux port you may connect another webmux to this port so that you can have redundancy. Connect them using a cross over cable, or a regular cable with a hub or switch in between. The two we...
- 5 - section 2 default switch configuration the webmux 690 contains a built-in vlan-enabled switch. The factory preset default vlan id is 4000 for the top row, and vlan id 4001 for the bottom row. All ports are untagged. The top row is the router lan, and bottom row is the server lan a user can cha...
- 6 - section 3 using swctl command from shell the webmux 690 contains a built-in vlan enabled switch. To configure this switch, please use the superuser’s command line shell command swctl. There are two ways to connect to the switch. After webmux has booted, you may connect to the superuser’s comma...
- 7 - vlan port add: 1. Config 2. Interface [port_id] 3. Vlan participation include [vlan_id] 4. Vlan pvid [vlan_id] 5. Vlan tagging [vlan_id] vlan port delete: 6. Config 7. Interface [port_id] 8. Vlan participation exclude [vlan_id] 9. No vlan pvid [vlan_id] 10. No vlan tagging [vlan_id] port chann...
- 8 - index console port, 3, 7 default, 4 port-channel, 7, 8 swctl, 3, 7 vlan database, 7.
