CAKEWALK REVALVER Manual - Descriptions Of Modules
ReValver Manual 12
A chain of modules!
Descriptions of modules
This chapter will discuss the most unique types of mod-
ules in ReValver.
The Preamps
Most preamps have similar parameters:
Input drive (This basically controls the amount of distor-
tion. It is the input drive to the preamp. The higher the
volume, the more the output signal will distort.)
Filters (The bass, mid and treble filters are applied after
distortion. To apply a filter before distortion, please use
a parametric filter module.)
Presence (It depends on preamp type what this does, but
it is usually a high-mid filter before distortion.)
Output level (This simply adjusts the output level of the
module. This can be used to control the distortion in the
poweramp.)
Trim pot
The trim pot has only one function: to adjust the signal
level. It has volume meters for visual indication. It can
be used in a +-16 or +-32dB span. By clicking the “nor-
malize” button, the signal is analyzed, and the level is
raised to the highest level possible without clipping.