CAKEWALK sonar le Quick Start Manual

Summary of sonar le

  • Page 1

    Sonar le quick start guide sonar le 1 we do not support tascam professional software sonar le. If you need customer support, we ask for your consideration of upgrading to sonar x3 series. For how to use, refer to the help menu of sonar le. Contents notations in this manual in this manual, we use the...

  • Page 2: Sonar Le Quick Start Guide

    Sonar le quick start guide 2 sonar le how to install to get sonar le, you need to download it from the website of cakewalk. The software is provided by downloading so that you can always use the latest version. Downloading sonar le 1. Access the following url and set the language to english. Http://...

  • Page 3: Sonar Le Quick Start Guide

    Sonar le quick start guide sonar le 3 how to register we request you to register for sonar le to distinguish authorized users. The software cannot be used without registration. Registering sonar le 1. When launching sonar le, you are prompted to enter a registration code. Click “register”. 2. You wi...

  • Page 4: Sonar Le Quick Start Guide

    Sonar le quick start guide 4 sonar le 4. After selecting, click “apply”. Necessary adjustments will be automatically carried out. 5. Click “devices” on the left side of the “preferences” screen and check that “us-200” is selected in the “playback timing master” and “record timing master” fields on t...

  • Page 5: Sonar Le Quick Start Guide

    Sonar le quick start guide sonar le 5 recording 1. Select a track to be recorded and then select an input bus (signal path of input source) in the “inspector” section on the left side of the screen. If the us-200 is connected, select “left us-200 us-200 in 1”. Now sounds from the input terminal 1 of...

  • Page 6: Sonar Le Quick Start Guide

    Sonar le quick start guide 6 sonar le mix-down mix-down is a process of combining sounds of a project recorded and produced in multiple tracks into a stereo file. 1. First, select a range to be mixed down. Move the cursor to the starting point and click “set thru = now” of the “transport bar”. 2. Mo...