Cal Flame BBQ09G870 Owner's Manual - Built-In Construction
Convection Grills
LTR50001086 Rev. C
Built-in Construction
www.calflamebbq.com
4
WIDTH
WIDTH
WIDTH
Minimum
Clearance
Minimum
Clearance
DEPTH
DEPTH
HEIGHT
HEIGHT
Your Cal Flame grill is designed for easy installation
into a non-combustible enclosure. The supporting
deck or counter must be flat and level.
Width
Depth Height
31”
22”
9 ¼”
Built-in Dimensions
Installation
Construction materials
DO NOT use combustible materials for the built-in construction .
Acceptable building materials: Brick,
cinder block, steel frame, hardiboard,
granite, tile, glass brick, concrete, cement,
stucco, stone.
Unacceptable building materials: Wood
of any sort, laminate or synthetic materials,
plastics, linoleum, fiberglass.
In addition, we do not recommend using materials that are susceptible to damage or decomposition by weather,
such as dry wall or plaster.
LMS Inc . will not be held responsible for property damage, injury, or death as a result of locating
a grill enclosure in a non-approved location or using non-approved construction materials .
Note: The terms “built-in construction” and “grill
enclosure” as used in these instructions refer to any
method for installing a barbecue island for use. A
barbecue island is both built-in constructions and a grill
enclosure. Read these instruction before constructing
your grill enclosure.
The Cal Flame charcoal grill is expected to be used
with a Cal Flame barbecue island. If the grill is not
placed in a Cal Flame barbecue island, it must be used
in a safe manner that will not void your warranty. If
you plan to do this, use the information in this section
on the construction and materials required for the grill
enclosure and its proper location. Cal Flame wishes
our customers to enjoy our products safely. We
strongly recommend that grill owners hire a contractor
to construct the built-in enclosure.
Failure to follow these instructions may result in voiding
your warranty, property damage, injury, or death.