Cal Flame Pavilion Islands User Manual - Installation After Delivery
8
Barbecue Island Predelivery Guide
Installation After Delivery
For more information on installing your grill and accessories, see the
grill and carts owner’s manual.
If your barbecue island has two or more pieces, the delivery crew
will mate pieces and bolt them together. When sections are aligned
and in place, the crew will apply grout and do whatever else is
necessary cosmetically to ensure the barbecue island is attractive and
presentable.
After your barbecue island is delivered, set in place, and the grill is
mounted, you will need to connect all of the services to your hardware.
If your dealer is not a certified contractor, you will need to hire a
contractor for this.
The natural gas line connects to the grill inside the island. As you are
facing the grill, the connection is located at the right rear side of the grill.
The stub-up will terminate with a valve and a ½” male fitting. Connect
the flexible tubing from the grill to the male fitting.
Both the natural gas and the electrical service connect inside where
the grill outlet is located.
The voltage transformer can be mounted to any part of the frame where
it will not be in the way. Plug it into the 110V grounded outlet located
inside the barbecue island.
Side burners do not require a separate regulator. You can put in a tee
in the line after it comes out of the regulator. For detailed installation
instructions, see the grill and cart owner’s manual.