Cal-Royal PL7100 User Manual

Manual is about: Smart

Summary of PL7100

  • Page 1

    Cover page user manual pl7100 rs2100

  • Page 2: Table of Contents

    Table of contents parts list - exterior 1 technical specifications 11 parts list - interior 2 troubleshooting 12 compatible cards and phones 3 disclaimer 13 phone operations 4 bluetooth unlocking 5 touchpad operations 6 programming codes using touchpad 7 varicode unlocking 8 lock-out 9 events, beeps...

  • Page 3: Pl7100 / Rs2100

    1 pl7100 / rs2100 status led sensor area and touchpad keyway parts list - exterior status led keyway sensor area and touchpad pl7100 rs2100

  • Page 4: Pl7100 / Rs2100

    2 pl7100 / rs2100 setup button setup button parts list - interior pl7100 rs2100 1. Introduction pl7100 and rs2100 are smart locks with bluetooth le, nfc, mifare rfid, and touchpad capabilities..

  • Page 5: Pl7100 / Rs2100

    3 pl7100 / rs2100 2. Compatible cards and phones 2.1 rfid cards / key fobs • support mifare classic, mifare ultralight, mifare desfire, or iso/iec 14443 type a with fixed uid. 2.2 phones • iphone 4s or above with ios 8.0 or above • android 4.3 or above with bluetooth low energy capability. Nfc capab...

  • Page 6: Pl7100 / Rs2100

    4 pl7100 / rs2100 4.2 by touchpad if admin phone is not available, the touchpad can also be used for selected management tasks. See later section for the full specification. 5. Phone operations 5.1 pairing to become the admin a. In the k3 connect app, press the “+” on the top-right corner of the loc...

  • Page 7: Pl7100 / Rs2100

    5 pl7100 / rs2100 b. Bluetooth auto unlocking to set up the auto unlocking feature, open the k3 connect app. In the locks page, select which lock you wish to set up and slide left on the tab. Press “info” and navigate to the menu to enable the auto unlocking features. There are 2 kinds of auto unloc...

  • Page 8: Pl7100 / Rs2100

    6 pl7100 / rs2100 6. Touchpad operations 6.1 wake up before any touchpad operations, touch the lock sensor to wake it up. 6.2 setting the master code (mc) the factory default master code is 12341234 mc length is between 6 to 12 digits. Follow these steps to change the maste code: 1. Press the setup ...

  • Page 9: Pl7100 / Rs2100

    7 pl7100 / rs2100 3. Delete code 4. Delete rfid card / key fob 5. Delete all codes (exclude master code) 6. Delete all rfid cards / key fobs 7. Delete all phones including admin 8. Delete all codes/cards/key fobs/phones including admin mc # 2 1 code # code # + + + + + + + mc # 2 2 + + + + tap card o...

  • Page 10: Pl7100 / Rs2100

    8 pl7100 / rs2100 6.4 code unlocking wake-up touchpad, enter code followed by # 6.5 varicode unlocking • varicode is a time-specific temporary code that can be generated in the app. Varicode can be generated in the app anywhere; no need to be in front of the lock. • varicode can be obtained in the a...

  • Page 11: Pl7100 / Rs2100

    9 pl7100 / rs2100 events beeps led setup button pressed 2 short beeps green flash 1x exit setup mode 2 short and 1 long beeps green flash 1x during setup mode - red light on pairing success 4 beeps ascending tone green flash 1x pairing fail 1 long and 4 short beeps, the long beep tone is higher red ...

  • Page 12: Pl7100 / Rs2100

    10 pl7100 / rs2100 events beeps led successful unlocking 3 beeps ascending tone green flash 1x access denied 1 long and 4 short beeps, the long beep tone is higher red flash 1x low battery successful unlocking 3 ascending tone beep followed by 5 short beeps green flash 1x red short flashes 5x succes...

  • Page 13: Pl7100 / Rs2100

    11 pl7100 / rs2100 12. Technical specifications • user counts: maximum 1 admin + 49 client phones, 50 codes, and 50 cards • powered by 4x aa batteries • operation temperature: -20°c to 70°c • radio frequency: nfc/mifare: 13.56mhz, bluetooth: 2.4ghz 13. Troubleshooting problem solution administrator ...

  • Page 14: Pl7100 / Rs2100

    12 pl7100 / rs2100 problem solution not relocking after being unlocked check if parameter setting is on passage mode lock not responding change battery and try again nfc unlocking is not working but other functions of the lock is still working 1. Close the app and restart, then try again 2. If it’s ...

  • Page 15: Pl7100 / Rs2100

    13 pl7100 / rs2100 disclaimer: cal-royal products does not claim that this lock can provide complete security by itself. This lock may be defeated by forcible or technical means, or evaded by entry elsewhere on the property like any other locks. No lock can substitute for vigilance, awareness of you...

  • Page 16

    6605 flotilla st., commerce,ca 90040 tel. (323) 888-6601 fax. (323) 888-6699 website: www.Cal-royal.Com e-mail: sales@cal-royal.Com.