CalAmp Fusion LTE User Manual - page 25
of
79
25
3.2.3
REMOTE ADMINISTRATION
Allows remote (over-the-air) configuration of the Fusion via HTTP, SNMP and Telnet. To connect remotely to the services
listed on this page, enter the WWAN IP of the device in a browser followed by the port set here. Example
172.193.50.1:80
For each service type, Selecting Enabled will allow remote access to the modem’s configuration over-the-air.
Selecting Disabled will shut off the ability to remotely access the modem’s configuration.
Port
Specifies the IP port to use for each service.
3.2.4
DYNAMIC DNS