Calculated Industries 5065 User Manual - User’S Guide — 17
Manual is about: NEC COMPLIANT UPDATEABLE ELECTRICAL CODE CALCULATOR
of
71
User’s Guide — 17
Conforms to NEC Section 430-32 (a)(1)
value of 115% unless you enter another
value. For example, entering 125
L
would calculate overload protection
based on 125% of the entered amperage.
Displays: AMPS ol
♦ Second Press
Displays the full-load current percent
multiplier value used to determine the
overload current protection size. Sub-
sequent presses of
L repeat the
cycle. Displays: %FLC
S h — Starter Size (Starter)
Displays the starter size (from NEMA
publication ICS 2-1988 Tables 2-327-1
and 2-327-2) based on the phase, Volt-
age, and motor Horsepower settings.
Displays: STAR SIZE
NOTE: Horsepower values not identi-
fied in NEMA tables will cause the cal-
culator to round up to the next larger
starter size in the table.