1. DL manuals
  2. Calculated Industries
  3. Calculator
  4. 8015
  5. User Manual

Calculated Industries 8015 User Manual

Manual is about: Conversion Calculator

Summary of 8015

  • Page 1

    Conversion calculator u ltra m easure m aster ® user’s guide tape c a l c u l a t e d i n d u s t r i e s ® u ltra m easure m aster ® ac + / – π per exp mpa wt/vol ml/sec cu m/min m/sec mm/sec psf psi met tons liters/sec oz/sec gpm kpa km/h ft/min ft/sec in/sec mph n-m in-lbs ft-lbs bdft ° f ° c hec...

  • Page 2: Able Of

    Introducing ultra measure master . . . . . . . . . .3 key definitions . . . . . . . . . . . . . . . . . . . . . . . .4 operating basics . . . . . . . . . . . . . . . . . . . . . .12 power on & off . . . . . . . . . . . . . .12 conventions & units of measure . .12 fractional settings . . . . . . . . ...

  • Page 3: Ntroducing

    The ultra measure master ® calculator simplifies conversions between metric and english weights and measures. The ultra measure master can convert the following types of dimensions: ◆ linear ◆ area ◆ volume ◆ weight ◆ between weight and volume ◆ temperature ◆ linear velocity ◆ volumetric velocity (f...

  • Page 4: [+] [–] [X] [÷] [=]

    [+] [–] [x] [÷] [=] arithmetic operation keys. [0] – [9] and [•] digits used for keying in numbers. [off] — off key turns all power off. [on/c] — on/clear key turns on power. Pressing once clears the display. Pressing twice clears all temporary registers but does not clear scales. [stor] — storage k...

  • Page 5: [Gal] — Gallon Key

    [gal] — gallon key displays and enters value as gallons. [fl oz] — fluid ounces key displays and enters value as fluid ounces. [liters] — liter key displays and enters value as liters. [ml] — milliliter key displays and enters value as milli- liters. [%] — percent key four function percent key. [ton...

  • Page 6: [Sq] — Square Key

    [sq] — square key defines a square dimension. [m] — meters key displays and enters value as meters. [cm] — centimeter key displays and enters value as centi- meters. [mm] — millimeter key displays and enters value as milli- meters. [km] — kilometer key displays and enters value as kilometers. [yds] ...

  • Page 7: [Miles] — Miles Key

    [miles] — miles key displays and enters value as miles. [shift] [gal] — gallons per minute displays and enters value as gallons per minute (gpm). [shift] [fl oz] — fluid ounces per second displays and enters value as fluid ounces per second (oz/sec). [shift] [liters] — liters per second displays and...

  • Page 8: [Shift] [Kg] — Kilopascals

    [shift] [kg] — kilopascals displays and enters value as kilo- pascals (kpa). [shift] [grams] — megapascals displays and enters value as mega- pascals (mpa). [shift] [sq] — cubic function defines a cubic dimension (cu). [shift] [m] — meters per minute displays and enters value as meters per minute (m...

  • Page 9: [Shift] [8] — Foot-Pound

    [shift] [inch] — inches per second displays and enters value as inches per second (in/sec). [shift] [miles] — miles per hour displays and enters value as miles per hour (mph). [shift] [9] — newton-meters displays and enters value as new- ton-meters (n-m). [shift] [8] — foot-pound displays and enters...

  • Page 10: [Shift] [2] — Celsius

    [shift] [2] — celsius displays and enters value as celsius (°c). [shift] [1] — board feet displays and enters value as board feet (bdft). [shift] [•] — per unit function allows you to calculate total material cost, if you multiply the total amount of material by the per unit cost of the item. [shift...

  • Page 11: [Conv] [X] — All Clear

    [conv] [x] — all clear resets calculator to default settings. [rcl] [x] — metric mode toggle toggles between metric mode and imperial-english mode. Note: this mode is not reset when you perform an all clear [conv] [x]. [rcl] [=] — paperless tape function accesses the “paperless tape” mode so you can...

  • Page 12: Power On & Off

    Power on & off turn the calculator on by pressing the [on/c] key. To turn the calculator off, press [off] . Conventions & units of measure conventions units of measure linear meters centimeters millimeters feet inches yards miles kilometers area square meters square yards square miles hectares squar...

  • Page 13: Conventions

    Conventions units of measure area cont’d square millimeters square inches acres volume cubic meters cubic yards cubic miles gallons milliliters cubic centimeters cubic feet cubic inches cubic kilometers fluid ounces board feet cubic millimeters acre-feet liters temperature celsius fahrenheit weight ...

  • Page 14: Conventions

    Conventions units of measure linear velocity feet per minute feet per second inches per second meters per minute meters per second millimeters per second miles per hour kilometers per hour volumetric fluid ounces per second velocity gallons per minute ( flow rate ) milliliters per second liters per ...

  • Page 15: Fractional Settings

    Fractional settings when your calculator is in a default condition (battery change or full reset), it is set to round fractional values to the nearest 1/64th of an inch. However, you may program your preference for six different accuracy levels and two different modes (normal and fixed), all of whic...

  • Page 16: Preference Feature

    Preference feature the ultra measure master provides preference settings that allow you to set fractional accuracy and display fea- tures. The preference settings are dis- played using [rcl] [/] . Repeated presses of [/] toggle through the different set- tings while the [+] and [–] keys are used for...

  • Page 17: Setting Fractional Accuracy

    F lashing f raction ◆ off (default) ◆ on whenever the fractional setting is other than 1/64 normal mode, a star (★) will appear in the bottom left of the display when the calculator is turned on. This indicates a special fractional setting is stored within. Setting fractional accuracy keystrokes dis...

  • Page 18: Setting Fractional Modes

    Setting fractional modes n ormal m ode in normal mode, the fractional result is reduced to its lowest common denom- inator (i.E., 8/16 reduces to 1/2). F ixed m ode in fixed mode, fractional results are left in the defined accuracy level (i.E., 8/16 will be shown as 8/16). Entries of high- er accura...

  • Page 19: [Shift] [/],

    To enter an exponential value, enter the main value, press [shift] [/], then enter the exponential power. Entering exponents enter 2.34x10 -8 into the calculator. Keystrokes display 2 [.] 34 2.34 [shift] [/] 2.34 [shift] [–] 8 2.34–8 [=] 2.34000–08 setting flashing denominator your calculator can be...

  • Page 20: Basic Math Operations

    Basic math operations your calculator uses standard chaining logic which simply means that you enter your first value, the operator (+, –, x, ÷), the second value and then the equals sign (“=”). A. 3 [+] 2 [=] 5 b. 3 [–] 2 [=] 1 c. 3 [x] 2 [=] 6 d. 3 [÷] 2 [=] 1.5 this feature also makes the calcula...

  • Page 21: [Conv]

    4) the format of the first value you enter determines the format of the answer. However, you can use the [conv] key to change to any format desired, pro- vided that you maintain convention. Examples: 1) add 7 feet 3-1/2 inches to 11 feet 4 inches: 7 [feet] 3 [inch] 1[/] 2 [+] 11 [feet] 4 [inch] [=] ...

  • Page 22: [Conv]

    Multiplying or dividing dimensions 1) you can multiply and divide two num- bers when the first value entered is labeled with units of measurement and the other is just a whole number (no units of measurement). 2) you cannot multiply or divide two numbers that have different units of measurement or d...

  • Page 23: 44.84375

    E xamples : 1) multiply 5 feet 3 inches by 8 feet 6-1/2 inches: 5 [feet] 3 [inch] [x] 8 [feet] 6 [inch] 1[/] 2 [=] 44.84375 sq feet 2) multiply 50 meters per minute by 12.5: 50 [shift] [m] [x] 12.5 [=] 625 m / m 3) multiply 33.5 gallons by 2.031: 33.5 [gal] [x] 2.031 [=] 68.0385 gl 4) divide 20 feet...

  • Page 24: Percent Calculations

    Percent calculations the percent key [%] can be used to find a percentage of a number or for work- ing add-on, discount or division per- centage calculations. 355 [x] 15 [%] 53.25 250 [+] 6.5 [%] 266.25 25 [–] 5 [%] 23.75 100 [÷] 50 [%] 200. Memory operation the ultra measure master has ten stor- ag...

  • Page 25: Steps

    Steps keystrokes store to memory x ( x = 0–9) [stor] x subtract from memory 0 [conv] [stor] [0] recall total in memory x [rcl] x recall & clear memory 0 [rcl] [rcl] clear memory 0, ( not display) [conv] [rcl] replace memory 0 [ conv ] [ rcl ] [ stor ] [ 0 ] clear memory 0 thru 9 [rcl] [+] reset calc...

  • Page 26: “Paperless Tape” Feature

    “paperless tape” feature the “paperless tape” feature allows the user to display the last 20 entries. While in this mode, the display looks similar to this: ↑ ↑ ↑ a b c a - the sequence number of entry (01 - 1st entry, 02 - 2nd entry, etc.) b - the math operator (+,–,x,÷,%) c - the entered or calcul...

  • Page 27: Ttl= 22

    2. Access the tape function: [rcl] [=] ttl= 22 feet 0 inch 3. Scroll from first value to total: [+] 01 4 feet 0 inch [+] 02+ 5 feet 0 inch [+] 03+ 6 feet 0 inch [+] 04+ 7 feet 0 inch [+] ttl= 22 feet 0 inch 4. Scroll to last 2 values: [–] 04+ 7 feet 0 inch [–] 03+ 6 feet 0 inch 5. Exit tape function...

  • Page 28: Clearing The Paperless Tape

    Clearing the paperless tape the paperless tape is cleared: 1) each time you press [on/c] [on/c] (clear); 2) each time you press [conv] [x] (full reset/all clear); 3) when you begin entering numbers (for a new problem) after pressing the equals [=] key; 4) when you turn the unit off. 28 – ultra measu...

  • Page 29: Entering Dimensions & Units

    Entering dimensions & units when entering feet-inch dimensional values, you must enter the largest dimen- sion first — feet before inches, inches before fractions. To enter fractions of an inch, enter the numerator (value above the line), press [/] (fraction bar key) and then enter the denominator (...

  • Page 30: Linear Conversions

    Linear conversions the ultra measure master can convert between these linear dimensions: ◆ meters (m) ◆ centimeters (cm) ◆ millimeters (mm) ◆ decimal feet (feet) ◆ feet-inch-fraction (feet inch) ◆ decimal inch (inch) ◆ yards (yd) ◆ miles (mi) ◆ kilometers (km) note: the bold letters in parentheses i...

  • Page 31: Dimension

    The following examples show how lin- ear dimensions are entered: dimension keystrokes 5 feet 5 [feet] 1/2 inch 1 [/] 2 5 feet 1-1/2 inch 5 [feet] 1 [inch] 1 [/] 2 10 yards 10 [yds] 17.5 meters 17.5 [m] any units of measurement other than inches must be entered as whole values (5 yards) or decimal va...

  • Page 32: Step/keystrokes

    Convert 27 feet to other linear dimen- sional formats. Step/keystrokes display 1. Enter 27 feet: 27 [feet] 27 feet 2. Convert to inches: [conv] [inch] 324 inch 3. Convert to yards: [conv] [yds] 9 yd 4. Convert to meters: [conv] [m] 8.2296 m 5. Convert to km: [conv] [km] 0.00823 km 6. Convert to mile...

  • Page 33: Steps/keystrokes

    Convert 65 meters to other linear dimensions. Steps/keystrokes display 1. Enter 65 meters: 65 [m] 65 m 2. Convert to cm: [conv] [cm] 6500 cm 3. Convert to yards: [conv] [yds] 71.08486 yd 4. Convert to miles: [conv] [miles] 0.040389 mi user’s guide – 33 8015ug-e-b 7/31/03 3:43 pm page 33.

  • Page 34: Area Conversions

    Area conversions your calculator can convert the follow- ing area dimensions: ◆ square meters (sq m) ◆ square yards (sq yd) ◆ square miles (sq mi) ◆ hectares (hect) ◆ square centimeters (sq cm) ◆ square feet (sq feet) ◆ square kilometers (sq km) ◆ square millimeters (sq mm) ◆ square inch (sq inch) ◆...

  • Page 35: Note:

    Note: you do not have to use the [sq] square key to convert to other square units of value; the calculator automatically con- verts to a square unit of value. Units keystrokes sq m [sq] [m] sq yd [sq] [yds] sq mi [sq] [miles] hect [shift] [4] sq cm [sq] [cm] sq feet [sq] [feet] sq km [sq] [km] sq mm...

  • Page 36: Steps/keystrokes

    E xamples : convert 1.25 acres to other area dimen- sions: steps/keystrokes display 1. Clear calculator. [on/c] [on/c] 0. 2. Enter 1.25 acres: 1.25 [shift] [5] 1.25 acre 3. Convert to sq feet: [conv] [feet] 54450 sq feet 4. Convert to sq yards: [conv] [yds] 6050 sq yd 5. Convert to meters: [conv] [m...

  • Page 37: 301.3895

    3. Convert to sq yards: [conv] [yds] 301.3895 sq yd 4. Convert to hectares: [conv] [shift] [4] 0.0252 hect volume conversions your calculator can convert between the following volume dimensions: ◆ cubic meters (cu m) ◆ cubic yards (cu yd) ◆ cubic miles (cu mi) ◆ gallons (gl) ◆ milliliters (ml) ◆ cub...

  • Page 38: [Conv]

    To convert a volume value on your dis- play, press the [conv] key and then the keystrokes for the volume dimension to convert it to (for example, [conv] [cm] to convert to cubic centimeters). Note: when converting volume dimen- sions, you do not have to use the [shift] [sq] cubic function to convert...

  • Page 39: Steps/keystrokes

    E xamples : convert 45.75 board feet to other vol- ume dimensions. Steps/keystrokes display 1. Clear calculator: [on/c] [on/c] 0. 2. Enter 45.75 board feet: 45.75 [shift] [1] 45.75 b feet 3. Convert to cubic feet: [conv] [feet] 3.8125 cu feet 4. Convert to cubic yards: [conv] [yds] 0.141204 cu yd 5....

  • Page 40: Steps/keystrokes

    Find the volume of a rectangular con- tainer 3 feet by 1 foot 9-5/8 inches by 2 feet 4 inches then convert to cen- timeters and yards. Steps/keystrokes display 1. Clear calculator. [on/c] [on/c] 0. 2. Enter length and multiply by width and depth: 3 [feet] [x] 1 [feet] 3 feet 9 [inch] 5[/]8 1 - 9 5/8...

  • Page 41: Steps/keystrokes

    Convert 126 liters to other volume dimensions. Steps/keystrokes display 1. Clear calculator. [on/c] [on/c] 0. 2. Enter 126 liters: 126 [liters] 126 l 3. Convert to gallon: [conv] [gal] 33.28568 gl 4. Convert to fluid oz: [conv] [fl oz] 4260.567 f - oz weight conversions your calculator can convert b...

  • Page 42: Note:

    Note: the letters in parentheses indicate the annunciator that displays when the units are selected. To convert a weight value on your dis- play, press the [conv] key, then the keystrokes for the weight unit to which you want to convert. Units keystrokes d-oz [dry oz] lb [lbs] ton [tons] gram [grams...

  • Page 43: Steps/keystrokes

    If your car has a 12 gallon tank, how many liters of gas will it take to fill it? What is the cost if 1 liter is $0.75? Use the per unit function to find the total cost of the gas. Steps/keystrokes display 1. Clear calculator. [on/c] [on/c] 0. 2. Enter 12 gallons: 12 [gal] 12 gl 3. Convert to liters...

  • Page 44: Weight/volume Conversions

    Weight/volume conversions the ultra measure master can convert between weight and volume. The default weights per volume factor is: ◆ 1.5 tons per cubic yard ◆ 3000 lbs per cubic yard ◆ 111.1111 lbs per cubic feet ◆ 1.779829 metric tons per cubic meter ◆ 1779.829 kg per cubic meter ◆ 1.779829 grams ...

  • Page 45: Steps/keystrokes

    E xamples : find the total volume of concrete needed to pour five 24 inch by 12 inch footings, each 2 feet deep. Then find the weight of the concrete (use the default weight fac- tor of 1.5 tons per cubic yard). Steps/keystrokes display 1. Clear calculator: [on/c] [on/c] 0. 2. Enter weight per cubic...

  • Page 46: Steps/keystrokes

    Find the weight of 15 cubic yards at 1.75 tons/cu yd, & convert to other weights. Steps/keystrokes display 1. Enter 1.75 factor: 1.75 [shift] [%] 1.75 ton per cu yd 2. Enter15 cu yds: 15 [shift] [sq] [yds] 15 cu yd 3. Convert to lbs then kg: [conv] [lbs] 52500 lb [conv] [kg] 23813.6 kg 46 – ultra me...

  • Page 47: Temperature Conversions

    Temperature conversions to convert a displayed temperature value, press [conv] then the key- strokes for either fahrenheit or celsius. Units keystrokes °c [shift] [2] °f [shift] [3] e xamples : convert 78 °f to a °c temperature. Steps/keystrokes display 1. Clear calculator. [on/c] [on/c] 0. 2. Enter...

  • Page 48: Linear Velocity Conversions

    Linear velocity conversions the ultra measure master can convert between the following linear velocities: ◆ feet per minute (fpm) ◆ feet per seconds (fps) ◆ inch per second (ips) ◆ meters per minute (m/m) ◆ meters per second (m/s) ◆ millimeters per second (mm/s) ◆ miles per hour (mph) ◆ kilometers p...

  • Page 49: [Conv]

    To convert a linear velocity on your dis- play, press the [conv] key and then the keystrokes for the linear velocity to convert it to. E xamples : convert 55 mph to kilometers per hour. Steps/keystrokes display 1. Clear calculator. [on/c] [on/c] 0. 2. Enter 55 mph then convert to kmh: 55 [shift] [mi...

  • Page 50: Gallons Per Minute (Gpm)

    Volumetric velocity conversions this calculator can convert between the following volumetric velocities: ◆ fluid ounces per second (ops) ◆ gallons per minute (gpm) ◆ milliliters per second (ml/s) ◆ liters per second (l/s) note: letters in parentheses represent the annunciator associated with the uni...

  • Page 51: Steps/keystrokes

    E xamples : convert 48 fluid ounces per second to liters per second. Steps/keystrokes display 1. Clear calculator. [on/c] [on/c] 0. 2. Enter 48 oz/s then convert to l/s: 48 [shift] [fl oz] 48 ops [conv] [shift] [liters] 1.419529 l / s an aqueduct should be sloped so that water travels less than 10 f...

  • Page 52: Steps/keystrokes

    The faucet in a house should provide 4.5 gallons of water per minute. If you have a 2 liter bottle that filled up in 12 seconds, is the faucet within code? Steps/keystrokes display 1. Clear calculator. [on/c] [on/c] 0. 2. Divide liters/sec: 2 [÷] 12 [=] 0.166667 3. Enter as liters/sec.: [shift] [lit...

  • Page 53: Units

    Units keystrokes psi [shift] [lbs] psf [shift] [dry oz] kpa [shift] [kg] mpa [shift] [grams] the following examples show how to convert a pressure value. E xamples : a water line is reading a pressure of .5 psi, what would the pressure be in psf, kpa and mpa? Steps/keystrokes display 1. Clear calcul...

  • Page 54: Steps/keystrokes

    Convert 24 pounds per square foot to kilopascals. Steps/keystrokes display 1. Clear calculator. [on/c] [on/c] 0. 2. Enter 24 psf: 24 [shift] [dry oz] 24 psf 3. Convert to kpa: [conv] [shift] [kg] 1.149126 kpa bending moment conversions the calculator can convert between the following bending moment ...

  • Page 55: [Conv]

    To convert a bending moment value on your display, press the [conv] key and then the keystrokes for the bending moment value to convert it to. E xamples : convert 120 inch-lb to newton-meters. Steps/keystrokes display 1. Enter 120 in/lb: 120 [shift] [7] 120 lb inch 2. Convert to n -m: [conv] [shift]...

  • Page 56: Steps/keystrokes

    Your metric-based plan says that the bridge rail bolt must be tightened to 30 n-m but your torque wrench only shows ft-lb. Find the ft-lb setting required to set up the wrench. Steps/keystrokes display 1. Clear calculator. [on/c] [on/c] 0. 2. Enter n -m: 30 [shift] [9] 30 n - m 3. Find ft/lbs: [conv...

  • Page 57: Accuracy/errors

    Accuracy/errors accuracy/display capacity — your cal- culator has an eleven digit display. This is made up of seven digits (normal dis- play) and four digits for the fraction. In a standard calculation, each calculation is carried out internally to 10 digits and rounded to a 7-digit standard display...

  • Page 58: Battery Information

    “10,000,000 mm” cannot be displayed because it is out of the 7-digit display, so “10,000 m” will be displayed instead. This auto-ranging also applies to other dimensional units, such as inches to feet, and feet to yards, etc. Battery information your calculator is powered by a single 3-volt lithium ...

  • Page 59: . S

    Calculated industries, inc. (“cii”) warrants this product against defects in materials and workmanship for a peri- od of one (1) year from the date of original consumer purchase in the u.S. If a defect exists during the warranty period, cii at its option will either repair (using new or remanufactur...

  • Page 60: — O

    The contiguous 48 states. (outside the contiguous 48 states, please call cii for return shipping costs.) a repaired or replacement product assumes the remaining warranty of the original product or 90 days, whichever is longer. Non-warranty repair covers service beyond the warranty period or service ...

  • Page 61: Cii

    Cii makes no warranty or representation , either express or implied , with respect to the product ’ s quality , performance , merchan - tability , or fitness for a particular purpose . A s a result , this product , including but not limited to , keystroke procedures , mathemati - cal accuracy and pr...

  • Page 62: Looking For New Ideas

    This equipment has been certified to comply with the limits for a class b computing device, pursuant to subpart j of part 15 of fcc rules. Looking for new ideas calculated industries, a leading man- ufacturer of special function calculators and digital measuring instruments, is always looking for ne...

  • Page 63: Mail

    How to reach cii headquarters 63 – user’s guide mail calculated industries, inc. 4840 hytech drive carson city, nv 89706 usa phone 1-775-885–4900 fax 1-775-885–4949 email techsup@calculated.Com world wide web http://www.Calculated.Com 8015ug-e-b 7/31/03 3:43 pm page 63.

  • Page 64

    U ltra m easure m aster ® and c alculated i ndustries ® are registered trademarks of calculated industries, inc. ©2003. All rights reserved software copyrighted and licensed to calculated industries by construction master technologies, llc, 2003. Printed in indonesia 8015ug–e–b1 8015ug-e-b 7/31/03 3...