Calculated Industries 8525 User Manual - - 7

P

OCKET

R

EFERENCE

G

UIDE

- 7

Ç 8 - Studs

Calculates number of studs, based on

an entered linear distance and a stored

On-Center Spacing (see below).

Note: Automatically adds one stud to the calcu-

lated answer to account for one on the end.

s 8 - Stores On-Center for Studs

Stores On-center spacing for studs in

Inches. To recall this setting, press

r 8. Default is 16”.

Ç 9 - Roof Bundles

Calculates number of bundles of roof

shingles, based on an entered roof

area and a stored Area per Roof

Bundle (see below).

s 9 - Stores Area per Roof Bundle

Stores the Coverage Area per Roof

Bundle. To recall this setting, press

r 9. Default is 33.33 sq.ft.

Ç 4 - 4x8 Sheet

Calculates number of 4’ x 8’ sheets

(for drywall, paneling), based on

entered linear distance or area.

Ç 5 - Carpet

Calculates carpet length required (of

either 12’, 13’ or 15’-wide carpet rolls),

based on entered area. Repeated

presses of 

5 will scroll between values

for 12’, 13’, and 15’ rolls.