1. DL manuals
  2. Calculated Industries
  3. Calculator
  4. Measure Master 4018
  5. Pocket Reference Manual

Calculated Industries Measure Master 4018 Pocket Reference Manual

Other manuals for Measure Master 4018: Specifications
Manual is about: FEET-INCH-FRACTION and METRIC CALCULATOR V3.1

Summary of Measure Master 4018

  • Page 1

    M easure m aster ™ 5 feet-inch-fraction and metric calculator model 4018 v3.1.

  • Page 2: Quickly Solve:

    The measure master 5 calculator helps you measure and estimate like a pro while saving you time by cutting costly errors. Quickly solve: • feet-inches-fractions, yards, and metric dimensional problems • feet-inches-fractions, yards, and metric conversions • problems involving all fractions – 1/2-1/6...

  • Page 3: Table of Contents

    Key definitions..................................1 basic function keys ............................1 unit keys .............................................2 circle/arc keys ....................................4 miscellaneous functions .....................4 paperless tape example .....................

  • Page 4

    Concrete volume for driveway ..........22 squaring-up a foundation .................22 appendix ...........................................23 setting fractional resolution.............23 default settings .................................24 auto-shut off .....................................25 accura...

  • Page 5: Ocket

    P ocket r eference g uide — 1 basic function keys + – x arithmetic operation keys. ÷ = 0 – 9 keys used for entering and • numbers. % percent key — four-func- tion (+, –, x, ÷) percent key. O off key — turns all power off, clearing all non-perma- nent registers. O on/clear key — turns on power. Press...

  • Page 6: Ocket

    P ocket r eference g uide — 2 unit keys y yards key — enters or converts to yards. F feet key — enters or con- verts to feet as whole or decimal numbers. Also used with the i and / keys for entering feet-inch values (e.G., 6 f 9 i 1 / 2 ). Repeated press- es during conversions tog- gle between fract...

  • Page 7: Ocket

    P ocket r eference g uide — 3 (1/2, 1/8, 1/16) or improper (3/2, 9/8). If the denomina- tor (bottom) is not entered, the calculator's fractional accuracy setting is automat- ically used. M meters key — enters or converts to meters. C centimeters key — enters or converts to centimeters. M millimeters...

  • Page 8: Ocket

    P ocket r eference g uide — 4 circle/arc keys c circle key – calculates circle area and circumference based on entered diameter. A arc key — calculates arc length or degree, chord length, segment area, pie slice area and segment rise based on entered diameter/radius and arc degree or length (i.E., i...

  • Page 9: Ocket

    P ocket r eference g uide — 5 Ç x clear all — returns all stored values to the default settings (does not affect preference settings). Ç – (+/–) toggle Ç + pi ( π ) 3.141593 Ç % x 2 — squares the value in the display. Ç ß preference settings ß 0 weight per volume — stores a new weight per volume val...

  • Page 10: Ocket

    P ocket r eference g uide — 6 Ç 0 total cost (based on entry of per unit cost) Ç • converts between d:m:s and decimal degrees. µ (m+) memory + Ç µ (m–) memory – ® ® recall and clear m+ ß 1 (m1) storage register ß 2 (m2) storage register ß 3 (m3) storage register ® µ , recall m+, m1, m2 or m3 1 , 2 o...

  • Page 11: Ocket

    P ocket r eference g uide — 7 paperless tape example add 6 feet, 5 feet, and 4 feet, then access the paperless tape mode and scroll back through your entries. Then, back up one entry, exit the tape mode and add 10 feet to the total. Keystroke display o o 0. 6 f + 6 feet 0 inch 5 f + 11 feet 0 inch 4...

  • Page 12: Ocket

    P ocket r eference g uide — 8 preference settings press Ç , then ß , then keep pressing ß to toggle through the main settings. Press the + key to advance within sub- setting. Use the – key to back up. Press the o key to exit preferences. Press Ç and: setting--function first press fractional resoluti...

  • Page 13: Ocket

    P ocket r eference g uide — 9 fourth press exponential mode: of ß : --off + --on + --off (repeats options) fifth press meter linear displays: of ß : --0.000 m + --float m (floating point) + --0.000 m (repeats options) sixth press decimal degree displays: of ß : --0.00° + --float (floating point) + -...

  • Page 14: Ocket

    P ocket r eference g uide — 10 adding and subtracting strings of dimensions add the following measurements: • 6 feet 2-1/2 inches • 11 feet 5-1/4 inches • 18.25 inches then subtract 2-1/8 inches. Keystroke display o o 0. 6 f 2 i 1 / 2 + 6 feet 2-1/2 inch 1 1 f 5 i 1 / 4 + 17 feet 7-3/4 inch 1 8 • 2 ...

  • Page 15: Ocket

    P ocket r eference g uide — 11 multiply 5 feet 3 inches by 11 feet 6-1/2 inches: keystroke display 5 f 3 i x 1 1 f 6 i 1 / 2 = 60.59375 sq feet dividing dimensions divide 15 feet 3-3/4 inches into thirds (divide by 3): keystroke display o o 0. 1 5 f 3 i 3 / 4 ÷ 3 = 5 feet 1-1/4 inch how many 3’6” pi...

  • Page 16: Ocket

    P ocket r eference g uide — 12 what is 25% of $1,575? Keystroke display o o 0. 1 5 7 5 x 2 5 % 393.75 square area find the area of a square room with sides measuring 15 feet 8-1/2 inches. Keystroke display o o 0. 1 5 f 8 i 1 / 2 15 feet 8-1/2 inch Ç % (x 2 ) 246.7517 sq feet square root what is the ...

  • Page 17: Ocket

    P ocket r eference g uide — 13 rectangular volume find the volume: • length: 20 feet 6-1/2 inches • width: 12 feet 8-1/2 inches • height: 10 inches keystroke display o o 0. 2 0 f 6 i 1 / 2 x 20 feet 6-1/2 inch 1 2 f 8 i 1 / 2 x 261.0503 sq feet 1 0 i = 8.057109 cu yd entering square and cubic and ad...

  • Page 18: Ocket

    P ocket r eference g uide — 14 linear conversions convert 10 feet 6 inches to other dimen- sions, including metric: keystroke display o o 0. 1 0 f 6 i 10 feet 6 inch Ç y 3.5 yd Ç i 126 inch Ç m 3.200 m Ç c 320.04 cm Ç m 3200.4 mm convert 14 feet 7-1/2 inches to decimal feet: keystroke display o o 0....

  • Page 19: Ocket

    P ocket r eference g uide — 15 square and cubic conversions convert 14 square feet to square yards: keystroke display o o 0. 1 4 f f 14 sq feet Ç y 1.555556 sq yd convert 25 square yards to square feet: keystroke display o o 0. 2 5 y y 25 sq yd Ç f 225. Sq feet convert 12 cubic feet to cubic yards: ...

  • Page 20: Ocket

    P ocket r eference g uide — 16 weight conversions convert 150 pounds to other weights (tons, metric tons, kilograms): keystroke display o o 0. 1 5 0 Ç 4 (lbs) 150 lb Ç 6 (tons) 0.075 ton Ç 3 (met tons) 0.068039 met ton Ç 1 (kg) 68.03886 kg weight per volume convert 20 cubic yards of concrete to poun...

  • Page 21: Ocket

    P ocket r eference g uide — 17 now convert again, if concrete weighs 2 tons per cubic yard (store new weight per volume value): keystroke display 2 ß 0 2. Ton per cu yd 2 0 y y y 20 cu yd Ç 4 (lbs) 80000. Lb Ç 6 (tons) 40. Ton Ç 3 (met tons) 36.28739 met ton Ç 1 (kg) 36287.39 kg Ç x all cleared (cle...

  • Page 22: Ocket

    P ocket r eference g uide — 18 (cont’d) memory is semi-permanent, clearing only when you: 1) turn off the calculator; 2) press ® ® ; 3) press Ç ® ; 4) press Ç x (clear all). When memory is recalled ( ® µ ), consecutive presses of µ will display the calculated average and total count of the accumulat...

  • Page 23: Ocket

    P ocket r eference g uide — 19 using the memory — finding quantity of carpet required --room 1: 12’ 4” x 15’ --room 2: 14’ 8” x 16’ --add 10% waste allowance keystroke display o o 0. 1 2 f 4 i 12 feet 4 inch x 1 5 f = 185. Sq feet µ m+ 185. Sq feet 1 4 f 8 i 14 feet 8 inch x 1 6 f = µ m+ 234.6667 sq...

  • Page 24: Ocket

    P ocket r eference g uide — 20 board feet and cost find the total board feet for the follow- ing boards: 2 x 4 x 16, 2 x 10 x 18, and 2 x 12 x 20. What is the total cost at $275 per mbm*? *per thousand board foot measure. Keystroke display o o 0. 2 x 4 x 1 6 b µ bdft 10.66667 2 x 1 0 x 1 8 b µ bdft ...

  • Page 25: Ocket

    P ocket r eference g uide — 21 arc properties find arc properties given a 5-foot diameter and an arc length of 3 feet 3 inches: keystroke display 1. Enter circle diameter and arc length: o o 0. 5 f c dia 5 feet 0 inch 3 f 3 i a arc 3 feet 3 inch 2. Find degree of arc, chord length, segment area, pie...

  • Page 26: Ocket

    P ocket r eference g uide — 22 concrete volume for driveway calculate the cubic yards of concrete required to pour a driveway that measures: 45 feet 5 inches long x 13 feet 6 inches wide x 5 inches deep. If concrete is $65 per cubic yard, what will it cost? Keystroke display o o 0. 4 5 f 5 i 45 feet...

  • Page 27: Ocket

    P ocket r eference g uide — 23 setting fractional resolution fractional resolution is pemanently set via the preference settings (see preference settings section for instructions). To select other formats temporarily (e.G., 1/64ths, 1/32nds, etc.), see the example below: add 44/64th to 1/64th of an ...

  • Page 28: Ocket

    P ocket r eference g uide — 24 default settings after a clear all ( Ç x ), your calculator will return to the following setting: stored value default value weight per volume 1.5 ton per cu yd if you replace your batteries or perform a full reset* (press o , hold down x , and press o ), your calculat...

  • Page 29: Ocket

    P ocket r eference g uide — 25 auto-shut off your calculator will shut itself off after about 8-12 minutes of non-use. Accuracy/errors accuracy/display capacity — your calcu- lator has a twelve-digit display made up of eight digits (normal display) and four frac- tional digits. You may enter or calc...

  • Page 30: Ocket

    P ocket r eference g uide — 26 (cont’d) auto-range — if an “overflow” is created because of an input and calculation with small units that are out of the standard seven-digit range of the display, the answer will be automatically expressed in the next larger units (instead of showing “error”) — e.G....

  • Page 31: Ocket

    P ocket r eference g uide — 27 replacing the battery 1) hold calculator upright with back of calculator toward you. 2) lift battery holder out. 3) remove old battery. 4) place new battery with positive side against the bottom of the holder. 5) insert holder into calculator with positive side of batt...

  • Page 32: Ocket

    P ocket r eference g uide — 28 area formulas area and volume formulas.

  • Page 33: Ocket

    P ocket r eference g uide — 29 volume formulas.

  • Page 34: Ocket

    P ocket r eference g uide — 30 warranty, repair and return information return guidelines: 1. Please read the warranty in this user's guide to determine if your calculated industries product remains under warranty before calling or returning any device for evaluation or repairs. 2. If your product wo...

  • Page 35: Ocket

    P ocket r eference g uide — 31 warranty repair service – u.S.A. Calculated industries (“ci”) warrants this product against defects in materials and workmanship for a peri- od of one (1) year from the date of original consumer purchase in the u.S. If a defect exists during the war- ranty period, ci, ...

  • Page 36: Ocket

    P ocket r eference g uide — 32 repair service – outside the u.S.A. To obtain warranty or non-warranty repair service for goods purchased outside the u.S., contact the dealer through which you initially purchased the product. If you cannot reasonably have the product repaired in your area, you may co...

  • Page 37: Ocket

    P ocket r eference g uide — 33 this equipment has been certified to comply with the limits for a class b computing device, pursuant to subpart j of part 15 of fcc rules. Calculated industries, a leading manufacturer of special- function calculators and digital measuring instruments, is always lookin...

  • Page 38

    This equipment has been certified to comply with the limits for a class b computing device, pursuant to subpart j of part 15 of fcc rules. Software copyrighted and licensed to calculated industries, inc. By construction master technologies, llc, 2006. Pocket reference guide copyrighted by calculated...