Calculated Industries PROJECTCALC CLASSIC 8503 Pocket Reference Manual - Dimensional Unit Keys

Dimensional Unit Keys

y — Yards Key

Enters or converts to yards.

f — Feet Key

Enters or converts to feet as whole or decimal numbers.

Also used with the 

i and / keys for entering Feet-

Inch Fraction values (e.g., 

6 f 9 i 1 / 2).

Repeated presses during conversions toggle between

Feet-Inch Fractions and Decimal Feet.

i — Inch Key

Enters or converts to inches as whole or decimal numbers.

Also used with the 

/ key for entering fractional inch

values (e.g., 

9 i 1 / 2). Repeated presses during

conversions toggle between Fractional and Decimal Inches.

m — Meter Key

Enters or converts to meters.

Entering Square or Cubic

Dimensions

To label a dimension as "square" or "cubic," enter the

value, then press the desired unit key twice for square

and three times for cubic. For example, to enter 25 cubic

yards, press 

2 5 y y y.

P

OCKET

R

EFERENCE

G

UIDE

- 3