Caldera Utopia Series Owner's Manual - Operating Instructions
27
NOTE: Whenever power is disconnected, and then reconnected to the spa, the Summer Mode timer will reset starting with the eight-hour shutdown mode. If a different
eight-hour shut down time is desired, deactivate the Summer Mode, then reactivate at the beginning of the desired eight-hour shut down time.
IMPORTANT: The Summer Mode will not lower the spa’s water temperature below the ambient air temperature.
To activate the Summer Mode, follow these steps:
Set the temperature control to 80°F (27°C).
1.
Onthecontrolpanel,simultaneouslypressandholdfor3seconds“TEMP▲”and“TEMP▼”.
2.
The Summer Mode must be deactivated when cooler temperatures return. To do this, simply repeat step 2.
lOCkInG FeaTures
Thelockingfeatures,TEMPERATURELOCKandSPALOCK,areenabledfromthecontrolpanelbyaspecificcombinationofbuttons.Onceenabled,alockwillremain
active until the specific button combination is applied to disable the lock. Even if power is disconnected from the spa and soon thereafter reapplied (such as a power
outage), the lock will remain in place.
spa lOck
The Spa Lock feature deactivates all of the functions of the control panel. It is generally used to prevent unwanted use of the spa.
ToactivatetheSpaLock,press“SET”button+“TEMP▼”buttonandholdforthreesecondsuntiltheSPAandlocksymbolareilluminated.
TodeactivatetheSpaLock,press“SET”button+“TEMP▼”buttonandholdforthreesecondsuntiltheSPAandlocksymbolarenolonger
illuminated.
TemperaTure lOck
The Temperature Lock feature disables the temperature control function from the control panel. All other functions on the control panel will operate
normally. Temperature Lock is most often used by those who do not want others to change the set temperature of the spa water.
ToactivatetheTemperatureLock,press“SET”button+“TEMP▲“buttonandholdforthreesecondsuntillocksymbolisilluminated.
TodeactivatetheTemperatureLock,press“SET”button+“TEMP▲“ button and hold for three seconds until the lock symbol is no longer illuminated.
auXIlIarY COnTrOl Panel BuTTOns
The auxiliary control panel, conveniently located opposite the main control panel allows the user to activate the jets, air blower, light, and music (if installed).
JeTs BuTTOn
There are two buttons which affect the jet pumps. Pressing any JETS button once will illuminate the jets symbol on the main control panel
display. The symbol will remain lit until the jet pump is turned off (see chart below), or after one hour of continuous operation when the pumps are
automatically shut off by the control system.
Geneva
™
, niagara
®
, Tahitian
®
, and elation
®
models:
Cantabria
™
model:
JETS 1 button
JETS 2 button
JETS 1 button
JETS 2 & 3 button
1st press:
2nd press:
3rd press:
Jet pump 1 on.
Jet pump 1 off.
N/A
Jet pump 2 on low speed.
Jet pump 2 on high speed.
Jet pump 2 off.
1st press:
2nd press:
3rd press:
4th press:
5th press:
6th press:
Jet pump 1 on low speed.
Jet pump 1 on high speed.
Jet pump 1 off.
N/A
N/A
Jet pump 2 on low speed.
Jet pump 2 on high speed.
Jet pump 2 on high speed/Jet pump 3 on high speed.
Jet pump 2 on low speed/Jet pump 3 on high speed.
Jet pump 2 off/Jet pump 3 on high speed.
All jets off.
aIr JeTs BuTTOn
(available on Cantabria, Geneva, niagara and Tahitian
spas)
The “AIR” button activates the air blower. When the “AIR” button is pressed, the air symbol
will illuminate on the main control panel display.
The symbol will remain lit until the button is pressed to turn off the air blower, or after fifteen minutes when the blower is automatically shut off by the
control system. While the air blower is on, air only jets are operating throughout the spa. To stop the air blower when active, simply press the “AIR”
button.
lIGHT BuTTOn
(available on Cantabria, Geneva, niagara, and Tahitian spas)
l/T/s BuTTOn
(available on elation spas)
The “LIGHT” or “L/T/S” button activates the SpaGlo
®
multi-zone lighting system and controls the intensity of the light. Pressing the “LIGHT” or “L/T/S”
button operates the light as follows:
1st press of the “LIGHT” button: all lights on.
•
2nd press: bartop lights off.
•
3rd press: waterfall light off.
•
4th press: main light, Euphoria
•
®
Jet, and Grab Bar lights on
mediumintensity;externalsconcelightsonfullintensity.
5th press: main light, Euphoria Jet, and Grab Bar lights on low
•
intensity;externalsconcelightsonfullintensity.
6thpress:mainlight,EuphoriaJet,andGrabBarlightsoff;external
•
sconce lights on full intensity.
7th press: all lights off.
•