CalderaSpas paradise series Owner's Manual - page 20
Page 17
Operating Instructions
TO ADJUST TREBLE
From the SETUP Source menu:
• Press
SETUP Source soft button to
advance to the SETUP Tone, Treble
screen.
• Press the soft button next to ▲ or ▼ to
change the Treble between -5 and +5.
TO ADJUST BASS
From the SETUP Source menu:
• Press
SETUP Source soft button to advance to the SETUP Tone,
Treble screen.
• Press
SETUP Tone,Treble soft
button to advance to the SETUP
Tone, Bass screen.
• Press the soft button next to ▲ or
▼ to change the Bass between -5
and +5.
TO ADJUST BALANCE
From the SETUP Source menu:
• Press
SETUP Source soft button to advance to the SETUP Tone,
Treble screen.
• Press
SETUP Tone,Treble soft button
to advance to the SETUP Tone, Bass
screen.
• Press
SETUP Tone,Bass soft button
to advance to the SETUP Balance
screen.
• Press the soft button next to ▲ or ▼ to
change the Balance between -5 and +5.
TO ADJUST SUBWOOFER
From the SETUP Source menu:
• Press
SETUP Source soft button to advance to the SETUP Tone,
Treble screen.
• Press
SETUP Tone,Treble soft button to advance to the SETUP
Tone, Bass screen.
• Press
SETUP Tone,Bass soft button
to advance to the SETUP Balance
screen.
• Press
SETUP Balance soft button to
advance to the SETUP Subwoofer
screen.
• Press the soft button next to ▲ or ▼
to change the Subwoofer Volume between 0 and 11.
TO DISCONNECT BLUETOOTH (RESET)
From the SETUP Source menu:
• Press
SETUP Source soft button to
advance to the SETUP Tone, Treble
screen.
• Press
SETUP Tone,Treble soft button
to advance to the SETUP Tone, Bass
screen.
• Press
SETUP Tone,Bass soft button
to advance to the SETUP Balance screen.
• Press
SETUP Balance soft button to advance to the SETUP
Subwoofer screen.
• Press
SETUP Subwoofer soft button to advance to the SETUP
Music Status screen.
Press the soft button next to
Reset to disconnect any device using the spa
music system so that another paired device may be used. This is also
necessary when trying to pair multiple devices because pairing is NOT
possible when another device is connected to the music system.
• Press
SETUP Music Status soft
button to advance to the
SETUP
BLUETOOTH screen.
To pair, press PAIR soft button followed
by pressing "connect" next to My Spa
BTXR on your device.
IMPORTANT: Use the BACK hardbutton
to go back to the
Function:SET screens if desired.