Caliber CA 2010D Pro User Manual - page 2
3
Digital Amplifier specifications.
CA 2010D Pro
Maximum Power Output at 13V
4 Ohm
1x 800W
2 Ohm
1x 1600W
1 Ohm
1x 2000W
Continuous Power Output at 13V
4 Ohm
1x 400W
2 Ohm
1x 800W
1 Ohm
1x1000W
Low Pass Filter
24db/Oct. 50 - 250Hz
Subsonic Filter
24db/Oct. 20 - 50Hz
Frequency response (+0, -1dB)
10Hz - 250Hz
Total Harmonic Distortion
<0,44% with 80kHz Bandpass
Signal to noise ratio (A-Weighted)
>70dB
Input Sensitivity
500mV - 15V
Output Impedance
1 - 4 Ohm
Fuse Rating
80A
Dimensions (WxHxD mm)
300 x 90 x 235
C
ALIBER DIGIT
AL
AMPLIFIER SPECIFIC
A
TIONS
Due to our effort to innovate and improve our amplifiers, this modern digital
Caliber Competition Pro amplifier offers you the following features:
•
Pulse Width Modulated (PWM) MOSFET Power Supply.
•
1 Ohm Stable.
•
Double-sided epoxy board for jumperless signal paths.
•
Variable input sensitivity 500mV to 15V.
•
Thermal, Overload and Short-circuit protection.
•
Excellent muting circuitry assures no turn on/off ‘pops’.
•
Built-in adjustable Low Pass Filter 50 - 250Hz.
•
Built-in adjustable Subsonic Filter 20 - 50Hz.
•
On/Off switch for built-in Subsonic Filter
•
Differential inputs to shunt any input noise.
•
Signal output RCA’s for additional amplifier(s).
•
Large power supply connectors for optimal power distribution.
•
European design and engineering.
•
Superb Sonic performance for your ‘Dream Machine’ on wheels.
•
Years and years of acoustic pleasure.
•
Digital Remote Control for the sub-woofer level.
•
CSS entrance for optional Caliber Control System.
2
C
ALIBER AMPLIFIER
FEA
TURES