Caliber CAL-F4040 Installation Instructions

FIXED TV

 WALL MOUNT BRACKET

Nov 2013

DISTRIBUTED BY RVM AUSTRALIA  t: (08) 9417 9944   e: sales@rvm.com.au

STEP 1

Professional Installer Highly Recommended

The manufacturer will not warrant any faulty installations, 

and damage to existing structures or any other 

fixtures / fittings as a result of incorrect installation.

CAL-F4040

HIGH CALIBER W

ALL MOUNTING SYSTEMS

STEP 4

STEP 3

Mount bracket to wall.

STEP 2

2

2

2

3

1

1

1

STEP 3

4

5

Locate screw fixtures in the back of your TV and attach 

railings (2) using the screws provided. 

The screw size required will vary on each TV so we have 

provided you with a range to choose from (M5, M6, M8).

Optional: Insert spacers if back of TV is not a flat.

Once the railings (2) are firmly

attached to the TV hook the railings

onto the wall bracket (1).

Slide the locking bar (3) through 

bracket (1) guide holes and holes in 

both railings (2) to secure them into 

place. Use locking pin (4) provided to 

secure locking bar.

Select a position for the wall bracket (1). If screwing into a 

plasterboard wall, use a stud finder to locate a beam behind the 

plasterboard to secure to. If fixing to a concrete/brick wall, we 

recommend the use of plastic wall anchors (6). Using the wall 

bracket as a stencil, hold the wall bracket in position and use a 

pencil through the screw holes to mark the locations on the wall for 

drilling. (See Additional Tools required section for drill bit sizes) Affix 

to wall using wall screws (5).

IMPORTANT: PRE-DRILL HOLES

Make sure bracket is secured to joists,

or anchors are used for concrete.

Mount railing to TV.

Fasten mount to bracket.

Position mount over bracket.

C

M

Y

CM

MY

CY

CMY

K

CALF4040.pdf   1   13/12/2013   2:24:57 PM