Caliber HPG406D Manual - page 13
1. Troubleshooting
Problem
Cause
Solution
The unit cannot be operated
The unit is blocked and “hangs”.
Pull the mains plug for
approximatly 5 seconds.
Then connect the unit
again.
No sound
Volume is too low.
Increase the volume.
Poor sound quality
Radio signal too weak
Try to adjust the antenna
position.
Battery almost empty
Charge the battery or
operate the device with
the power supply unit.
FM: Hiss
DAB: intermittent cut-out.
DAB: “No stations
available”message
Low signal strength
Check/move antenna
Move radio
Rescan local
CARE AND MAINTENANCE
- Do not subject the unit to excessive force, shock, dust or extreme temperature.
- Do not tamper the internal components of the unit.
- Clean the unit with a damp (never wet) cloth except metal contact or speaker grille, Solvent or
detergent should never be used.
- Avoid leaving your unit in hot, humid or dusty places.
- Keep your unit away from heating appliances and sources of electrical noise such as fluorescent
lamps or motors.
- Always keep your finger dry and clear before touching all the buttons.
- Do not dispose of batteries in fire, batteries may explode or leak.
SPECIFICATION
Power adapter (included)
Input AC 100 ~ 240V
Ouput DC 5V 2A
Battery capacity (included)
1000 mAH
Max Play Time (with battery)
3 Hours
Power Consumption
8W
Standby Power Consumption
<1W
DAB Frequency
174-240 MHZ
FM Frequency
87.5 - 108 MHZ
Working Temperature
-5°C ~ +40°C
Working Humidity
20% ~ 80%
The right to make technical and design modifications in the course of continuous product develop-
ment remains reserved. This device has been tested according to all relevant current CE guideli-
nes, such as electromagnetic compatibility and low voltage directives, and has been constructed in
accordance with the latest safety regulations.