En-2 location of parts and controls 1. Power on/off ( ) 2. Function select button: bass/treble/balance/fader / ta seek/pi sound/ retune/mask dpi/eon/beep/ta vol/adj time/audio dsp (sel) 3. Vol up/vol down for bass/treble/balance/fader 4. Preset stations (1,2,3,4,5,6) 5. ‘af’ function (alternative fr...
En-3 53mm 182mm 3 2 182mm 53mm 1 2 1 3 4 bend these claws, if necessay release screw and bracket iso connector rca jack line out: red (right) white (left) connector a 4. Memory +12v 5. Auto antenna output 7. +12v (to ignition key) 8. Ground note: (connector a no. 7) wire must be connected by car ign...
En-4 10 7 1 2 3 4 4 4 5 5 6 6 8 9 dashboard to support the unit detaching and attaching the front panel the front panel of this unit can be detached in order to prevent the unit from being stolen. Folding down and detaching/attaching the front panel before detaching the front panel, be sure to press...
En-5 operation instructions 1. Power on/off ( ) by pressing this key, the unit is on and off. This unit is turned on by pressing any key. 2. Function select button: bass/treble/balance/fader / ta seek/pi sound/retune/ mask dpi/eon/beep/ta vol/adj time/audio dsp (sel) turning the vol knob right or le...
En-6 eon mode (2) when press the sel button for more than 2 seconds, it is activated as selecting mode of these function. When the eon function is switched on the radio switches to traffi c radio or pty groups if the ta or pty function has been activated. The eon function on (eon on) or off (eon off...
En-7 using the rds function what is rds? The rds (radio data system) is a digital information system developed by the ebu (european broadcast union). Piggy-backed on normal fm broadcasts, rds offers a variety of information services and automatic retuning functions for rds-compatible car stereos. In...
En-8 14. Mute button ( ) press this button to mute the sound at once. Press again to return to previous volume level. 15. Lcd display the liquid crystal display will display the current state of the unit. 16. Open the front panel press button and the front panel will open. Cd/mp3/wma control locatio...
En-9 • press “vol” knob longer than 2 sec. • the song which has same character you selected is displayed. • with “vol vol vol / vol vol vol ” knob, you can select the song you want. • press “vol” knob, then the song you selected will start. Connecting it to portable mp3 player 25. Usb port using usb...
En-10 technical specifications cd/mp3/wma player section signal to noise ratio > 60 db channel separation > 50 db (1khz) frequency response 20 hz - 20 khz tuner fm frequency range 87.5-108 mhz intermediate frequency 10.7 mhz sensitivity 2.8 µv stereo separation 30 db signal to noise ratio 50 db chan...
