Caliber RDD 57IBT User Manual - page 23
2. Common Operation
1. To turn on/off the unit
In power off mode, short press the POWER button to turn on the unit.
In power on mode, long press the POWER button on the front panel or short
press the POWER button on the remote control to turn off the unit.
2. To slide the monitor of the Car Audio System out of/into the chassis
Pressing the OPEN button can slide the monitor of the Car Audio System out
of the chassis or slide it into the chassis.
3. To select an optimal angle of the monitor of the Car Audio System
To select an up-down optimal angle of the monitor of the Car Audio System,
press the DOWN/UP button on the monitor or ANG button on the remote control
repeatedly.
4. To select function mode
5.
6. To mute sound
Press the MUTE button on the remote control to turn on/off MUTE mode.
pressing the POWER button on the front panel shortly also can turn on/off MUTE
mode.
9. To turn on/off LOUD mode
Press the LOUD button to turn on/off LOUD mode.
When turning on LOUD mode, it will enhance bass level immediately when bass
is not enough.
10.To remove the front panel and reset the player
When the monitor or the small LCD display wrongly or some buttons are not
available or sound is distorted, press the REL button on the front panel to detach
the front panel and then pull it rightward and then leftward to remove it, then
press the RESET button to rehabilitate the distorted program to zero.
Press the MODE button to select RADIO, DISC
(After inserting a disc), USB(After inserting a USB
storage), CARD(After inserting a card), AUX or
BLUETOOTH mode.
During playback, tapping the
icon after popping
up Keyboard interface can pop up Mode Menu as
right. then tap one icon in it to select your desired
mode.
To adjust sound level
Rotate the VOL knob on the front panel or press or hold
the + or - button on the remote control to directly adjust the volume level.
Press the EQ button on the remote control to select one of the preset music
equalizer curves:
The sound effect will be changed.
7.
8. To select a desired
To display clock time
Press the CLK button to display clock time on the small monitor of the front panel.
After sliding the monitor into the chassis, pressing the CLK button can display
clock time on the small LCD.
EQ mode
POP, ROCK, CLAS, OFF.
4.23.2 LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
4.23.3 AUDIO SETUP
AUDIO OUT
KEY
4.23.4 VIDEO SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
This item is for selecting the language of the
SYSTEM MENU and all operating prompt
interface displayed during playback.
This item is for selecting a audio language.
This item is for selecting a subtitle language.
This item is for selecting a disc menu language.
there is only ANALOG mode, i.e. SPDIF/OFF,
not optional.
It is for selecting your desired basic music tone
(from low to high).
It is for adjusting the brightness of the video output.
It is for adjusting the contrast of the video output.
It is for adjusting the hue of the video output.
It is for adjusting the saturation of the video output.
It is for adjusting the sharpness of the video output.
Mode Menu
PDF created with FinePrint pdfFactory trial version
http://www.pdffactory.com