Caliber rmd 046 Manual - Rmd 046
RMD 046
installation
Page 2
Page 1
INSTALLATION METHOD
OPERATING THE UIIT
METAL MOUNTING SLEEVE
Bend the tabs on the metal mounting
sleeve against the DASHBOARD with
a screwdriver.
METAL
SUPPORT STARP
DASHBOARD
For optimum anti-skip capability of the unit,
please ensure the metal support strap is
bolted firmly to the car chassis.
SOFT PLASTIC TRIM RING
To remove the unit out of the metal mounting sleeve,
insert the two supplied KEYS into the left and right side
slots of the chassis at the same time. Then pull the chassis
out of the metal mounting sleeve as shown in the right
illustration.
1
10
11
12 13
14
15
16 17
2
3
7
5
4
18
8
6
9
SD
AUX
1.- RESET BUTTON
The unit must be reset under the following conditions:
A) Prior to using this unit for the first time after installation.
B) If the unit fails to operate properly, press the RESET with a pen tip or other pointed instrument.
2. - SEL & VOL CONTROL BUTTON
A) Press the SEL repeatedly to select VOLUME - BASS - TREBLE - BALANCE - FADER.
B) Press and hold the SEL to select EQ(JAZZ - ROCK - POPS - CLASS - OFF),LOUD(ON/OFF) and
BEEP(ON/OFF).
3. -POWER ON/OFF AND MUTE
Press the POWER to turn on this unit. To turn off theunit, press and hold this button unit it off.
During playing, press this to mute the sound.
4. - LCD DISPLAY
5. - MODE BUTTON
Press the MODE to select RADIO/CARD(SD/MMC card inserted)/USB(flash driver inserted)
/AUX mode.
IN SD/MMC, and USB mode, press and hold this button to activate TRACK SEARCH and
play the select track automatically.
6&7. - TUNE, SEEK, TRACK, SKIP UP/DOWNBUTTONS
A) Radio mode
Press the>>I or I
Press and hold the >>I or I
The unit will tune to the station with strong signal.
B) SD/MMC, and USB mode
Press the >>I or I
8. - BAND/AP BUTTON
Press this button to select radio band as follow:
FM1 -> FM2 -> FM3 -> MW1 -> MW2
Press and hold the BAND button to activate the auto storage function. The unit scans and preset
the stations with strongest signal.(18stations in FM , 12 stations in MW )
9. - CLOCK BUTTON
Press the CLK to show the time. To adjust the time, press and hold the CLK until flashing and
change HOUR or MINUTE by press the >>I or I
10-15. - PRESET STATIONS MEMORY AND >II, INT, RPT, RDM BUTTONS
A) Radio mode
Press the 1-6 buttons to select the preset stations.
Press and hold the 1-6 buttons to store the station that currently listening.
B) SD/MMC, and USB mode
Press the >II to pause or resume playing.
Press the INT to play the first 10 seconds of the tracks.
Press again to off this function and the current track will keep playing.
Press the RPT once to repeat plays the current track.
Press the RPT twice to repeat plays the current folder.
Press the RDM to turn random play on or off.
Press the 5/6 to move up or down 10 tracks at a time(Note: when the remaining tracks less than
10, this function is invalid)
Press the MODE to select auxiliary input playing mode when connecting with external audio
device.
When SD/MMC card is inserted,the unit is automatically switched to SD/MMC mode.(Note:if both
USB storage device and SD/MMC card inserted,the system will switch to the mode of the latest
connected.)
When USB storage device is connected,the unit is automatically switched to USB mode.
16.-AUX JACK
17.-SD/MMC CARD SLOT
18.-USB PORT
PDF created with FinePrint pdfFactory trial version
http://www.pdffactory.com
Page 2
Page 1
INSTALLATION METHOD
OPERATING THE UIIT
METAL MOUNTING SLEEVE
Bend the tabs on the metal mounting
sleeve against the DASHBOARD with
a screwdriver.
METAL
SUPPORT STARP
DASHBOARD
For optimum anti-skip capability of the unit,
please ensure the metal support strap is
bolted firmly to the car chassis.
SOFT PLASTIC TRIM RING
To remove the unit out of the metal mounting sleeve,
insert the two supplied KEYS into the left and right side
slots of the chassis at the same time. Then pull the chassis
out of the metal mounting sleeve as shown in the right
illustration.
1
10
11
12 13
14
15
16 17
2
3
7
5
4
18
8
6
9
SD
AUX
1.- RESET BUTTON
The unit must be reset under the following conditions:
A) Prior to using this unit for the first time after installation.
B) If the unit fails to operate properly, press the RESET with a pen tip or other pointed instrument.
2. - SEL & VOL CONTROL BUTTON
A) Press the SEL repeatedly to select VOLUME - BASS - TREBLE - BALANCE - FADER.
B) Press and hold the SEL to select EQ(JAZZ - ROCK - POPS - CLASS - OFF),LOUD(ON/OFF) and
BEEP(ON/OFF).
3. -POWER ON/OFF AND MUTE
Press the POWER to turn on this unit. To turn off theunit, press and hold this button unit it off.
During playing, press this to mute the sound.
4. - LCD DISPLAY
5. - MODE BUTTON
Press the MODE to select RADIO/CARD(SD/MMC card inserted)/USB(flash driver inserted)
/AUX mode.
IN SD/MMC, and USB mode, press and hold this button to activate TRACK SEARCH and
play the select track automatically.
6&7. - TUNE, SEEK, TRACK, SKIP UP/DOWNBUTTONS
A) Radio mode
Press the>>I or I
Press and hold the >>I or I
The unit will tune to the station with strong signal.
B) SD/MMC, and USB mode
Press the >>I or I
8. - BAND/AP BUTTON
Press this button to select radio band as follow:
FM1 -> FM2 -> FM3 -> MW1 -> MW2
Press and hold the BAND button to activate the auto storage function. The unit scans and preset
the stations with strongest signal.(18stations in FM , 12 stations in MW )
9. - CLOCK BUTTON
Press the CLK to show the time. To adjust the time, press and hold the CLK until flashing and
change HOUR or MINUTE by press the >>I or I
10-15. - PRESET STATIONS MEMORY AND >II, INT, RPT, RDM BUTTONS
A) Radio mode
Press the 1-6 buttons to select the preset stations.
Press and hold the 1-6 buttons to store the station that currently listening.
B) SD/MMC, and USB mode
Press the >II to pause or resume playing.
Press the INT to play the first 10 seconds of the tracks.
Press again to off this function and the current track will keep playing.
Press the RPT once to repeat plays the current track.
Press the RPT twice to repeat plays the current folder.
Press the RDM to turn random play on or off.
Press the 5/6 to move up or down 10 tracks at a time(Note: when the remaining tracks less than
10, this function is invalid)
Press the MODE to select auxiliary input playing mode when connecting with external audio
device.
When SD/MMC card is inserted,the unit is automatically switched to SD/MMC mode.(Note:if both
USB storage device and SD/MMC card inserted,the system will switch to the mode of the latest
connected.)
When USB storage device is connected,the unit is automatically switched to USB mode.
16.-AUX JACK
17.-SD/MMC CARD SLOT
18.-USB PORT
PDF created with FinePrint pdfFactory trial version
http://www.pdffactory.com