Caliber RMD 310BT Instruction manual - page 2
EN-
2
1
INSTALLATION
PRECAUTIONS
•
Choosethemountinglocationcarefullysothattheunitwillnotinterferewiththenormaldrivingfunctionsof
thedriver.
•
Avoidinstallingtheunitwhereitwouldbesubjecttohightemperatures,suchasfromdirectsunlightorhot
airfromtheheater,orwhereitwouldbesubjecttodust,dirtorexcessivevibration.
•
Useonlythesuppliedmountinghardwareforasafeandsecureinstallation.
•
Besuretoremovethefrontpanelbeforeinstallingtheunit.
NOTE : Inclination angle for car radio installation must not exceed 30˚ otherwise the front panel will not open.
NOTE: Keepthereleasekeyinthesafeplaceasyoumayneeditinfuturetoremovetheunitfromthecar.
Detaching and attaching the front panel
Thefrontpanelofthisunitcanbedetachedinordertopreventtheunitfrombeingstolen.
FOLDING DOWN AND DETACHING/ATTACHING THE FRONT PANEL
Beforedetachingthefrontpanel,besuretopressthe
button (1) OFF first.
Thenpressthe
button,lettheFrontPanel arrive inhorizontal position and detach thepanelbypulling it
towardsyouasillustrated.
Notes:
•
Donotpressthefrontpanelhardagainsttheunitwhenattachingit.Itcanbeeasilyattachedbypressingit
lightlyagainsttheunit.
•
Whenyoucarrythefrontpanelwithyou,putitinthesuppliedfrontpanelcase.
•
Donotpresshardorgiveexcessivepressuretothedisplaywindowofthefrontpanelwhenattachingitto
theunit.
CLEANING THE CONNECTOR
Theunitmaynotfunctionproperlyiftheconnectorsbetweenthe
unit and the front panel are contaminated with dirt. In order to
preventthisfromhappening,detachthefrontpanelbypressing
the
buttonandcleantheconnectorfromtimetotime.
Clean the connector with a cotton swab together with contact
cleanerasillustrated.Besuretocleanthemcarefullypinbypin
andmakesurenottodamagetheconnectingpoints.
2
182mm
53mm
3
4
TAP
1
1
2
Bendthese
claws,ifnecessay
<10°
CottonSwab
Rearof
frontpanel
Mainunit