Calibre UK FoveaHD Manual - Contents
Summary of FoveaHD
Page 1
©calibre uk limited issue 1.2 december 2013 foveahd remote control guide version 1.2 calibre uk ltd cornwall house, cornwall terrace bradford, west yorkshire bd8 7js, england telephone +44 (0)1274 394125 fax + 44 (0)1274 730960 email techsupport@calibreuk.Com web-site www.Calibreuk.Com.
Page 2: Contents
©calibre uk limited issue 1.2 december 2013 e&oe page 1 contents introduction 2 the basic system 3 flexible connectivity 3 menu tree 4 control via front panel buttons 9 control via web browser 10 control via rs232 31 control via tcp/ip lan 34 non valid commands and queries 36.
Page 3: Introduction
©calibre uk limited issue 1.2 december 2013 e&oe page 2 introduction this guide is a non-technical introduction to operating the foveahd by remote control. The guide describes how to connect to a network and use the built-in web server and alternatively how to tcp/ip and rs232 api control commands. ...
Page 4: The Basic Setup
©calibre uk limited issue 1.2 december 2013 e&oe page 3 the basic setup the flowchart below represents the options for remote control, additional information can be found further in this guide. Flexible connectivity the foveahd can be fully controlled via the front panel buttons and the built in lcd...
Page 5: Menu Tree
©calibre uk limited issue 1.2 december 2013 e&oe page 4 menu tree.
Page 6
©calibre uk limited issue 1.2 december 2013 e&oe page 5.
Page 7
©calibre uk limited issue 1.2 december 2013 e&oe page 6.
Page 8
©calibre uk limited issue 1.2 december 2013 e&oe page 7.
Page 9
©calibre uk limited issue 1.2 december 2013 e&oe page 8.
Page 10
©calibre uk limited issue 1.2 december 2013 e&oe page 9 control via front panel lcd and menu buttons the foveahd has front panel lcd display which gives status information and access to the in-built menu system. In: 1920x1080i @50.00 hz 3g-sdi 1 out:1920x1080i @59.94 hz free run mode 3g-sdi 1 c-ypbp...
Page 11
©calibre uk limited issue 1.2 december 2013 e&oe page 10 control via built-in web server fovea hd has a built-in web server which can be addressed by any current web browser connecting to the lan port. Please note that the response time to commands sent using a web browser varies with both the natur...
Page 12
©calibre uk limited issue 1.2 december 2013 e&oe page 11 the ‘discovery tool’ will open a window that looks like this. In this example there is just a single fovea hd attached, it can be seen identified as its parent group title of vxl click on the ip address of the unit you wish to access that mach...
Page 13
©calibre uk limited issue 1.2 december 2013 e&oe page 12 from the main menu or index page click on memc/frc settings click on the frc level drop down box click on the desired level – note drop/repeat turns off the motion compensation click on the memc exclusion zone: in this menu section an area of ...
Page 14
©calibre uk limited issue 1.2 december 2013 e&oe page 13 going back to the main menu click on time code settings: in this section of the menu all the settings for free run or input referenced time code can be accessed.
Page 15
©calibre uk limited issue 1.2 december 2013 e&oe page 14 the next item in the main menu is input select click on the drop down box to reveal the list of available inputs, to select click on the required input.
Page 16
©calibre uk limited issue 1.2 december 2013 e&oe page 15 the next item in the main menu is input adjust there is a separate independant memory for the adjustments you make to each input..
Page 17
©calibre uk limited issue 1.2 december 2013 e&oe page 16 each of the third layer menus are pictured below refer to the user manual and set-up guide for more detailed instructions clock position is for adjustment of the vga input only.
Page 18
©calibre uk limited issue 1.2 december 2013 e&oe page 17.
Page 19
©calibre uk limited issue 1.2 december 2013 e&oe page 18.
Page 20
©calibre uk limited issue 1.2 december 2013 e&oe page 19 the next item in the main menu is output settings.
Page 21
©calibre uk limited issue 1.2 december 2013 e&oe page 20
Page 22
©calibre uk limited issue 1.2 december 2013 e&oe page 21 the next item in the main menu is audio.
Page 23
©calibre uk limited issue 1.2 december 2013 e&oe page 22 the next item in the main menu is closed captioning.
Page 24
©calibre uk limited issue 1.2 december 2013 e&oe page 23 the next item in the main menu is information.
Page 25
©calibre uk limited issue 1.2 december 2013 e&oe page 24 the next item in the main menu is miscellaneous.
Page 26
©calibre uk limited issue 1.2 december 2013 e&oe page 25.
Page 27
©calibre uk limited issue 1.2 december 2013 e&oe page 26.
Page 28
©calibre uk limited issue 1.2 december 2013 e&oe page 27.
Page 29
©calibre uk limited issue 1.2 december 2013 e&oe page 28.
Page 30
©calibre uk limited issue 1.2 december 2013 e&oe page 29.
Page 31
©calibre uk limited issue 1.2 december 2013 e&oe page 30 the next item in the main menu is logo upload.
Page 32: Control Via Api
©calibre uk limited issue 1.2 december 2013 e&oe page 31 control via api the api manual is available to down load from:- http://www.Calibreuk.Com/documents/vxl/vxl%20api%20protocol_v1.40%20generic.Pdf please refer to this manual for detailed description of control parameters and for lists of codes f...
Page 33
©calibre uk limited issue 1.2 december 2013 e&oe page 32 b. In this second example, change the assigned input to the front panel input buttons this example is used to provide easily visible changes:- to change input button 1 to 3g-sdi 1 send the string apc aaba ae aaaaab a note that the parts of the...
Page 34
©calibre uk limited issue 1.2 december 2013 e&oe page 33 i. Ap - always start the application string with these characters ii. B - this is the function identifier, in this case:- b = get a value iii. Aac8 – this is the parameter identifier, in this case:- aac8 = front panel backlight brightness iv. ...
Page 35
©calibre uk limited issue 1.2 december 2013 e&oe page 34 control via tcp/ip lan remote control port connect to the lan port. Users can connect directly to the lan port with a changeover cable or via a switch or router with normal ethernet cables. Users can also connect via a local area network. The ...
Page 36
©calibre uk limited issue 1.2 december 2013 e&oe page 35 to request the range of valid values when setting the lcd panel back light send the following apb aac8 ac aaaaaa a to ask for the minimum valid value i. Ap - always start the application string with these characters ii. B - this is the functio...
Page 37
©calibre uk limited issue 1.2 december 2013 e&oe page 36 non valid commands and queries if a non valid command or request is made the fovea hd will return the answer er: followed by a string such as er:aaaaadaaaaaa = function is not implemented error codes can be found in the api manual section 3.2....