Califone AV2 User Manual - page 5
califone.com
6
califone.com
7
4. SETUP AND INSTALLATION
4.1 RECHARGING
1. Before use, for best performance be sure to recharge the AV2
using either the USB connection to a PC or the included power
adapter.
2. Connect the power adapter to the wall outlet and then to the
USB port on the back of the AV2 using the included USB cable.
3. The AV2 will immediately begin charging. A red LED behind the
ESC button indicates the unit is charging. When charging is
complete, the red LED will go off.
4. The battery level indicator in the upper right of the LCD screen
indicates how much battery power is available. When the
indicator is low, the battery should be recharged.
NOTES:
• The AV2 may be operated while recharging using the wall power
adapter.
• The AV2 may also be operated while recharging using a PC. To
do this, first turn on the AV2 power and then plug it into the PC
for charging. The USB logo will be displayed on the AV2 screen.
Then turn off the AV2 power and an icon showing a battery
charging will be displayed. Then press the OK button. The AV2
can now be operated normally.
4.2 POWER ON AND OFF
1. To turn on the AV2 power, hold the power button for 2-3 seconds.
The LCD will then show the startup screen. A green LED will
light behind the OK button to indicate the power is on.
2. To turn off the AV2 power, hold the power button for 2-3 seconds.
The LCD will then show the shutdown screen and then go black.
4.3 SETTING THE DATE/TIME
1. To set the date/time, go to Settings -> System settings -> Set
Date/Time.
2. Then set the time zone and Date/Time as appropriate.
4.4 COPYING MEDIA FILES TO THE AV2
1. First, ensure the AV2 power is on.
2. Plug the AV2 into a PC using the included USB cord.
3. The PC will automatically recognize the device and the internal
flash memory will be listed as a removable external drive.
4. If an SD card is installed, it will also show up as a removable
external drive on the PC.
5. Note the AV2 content directories are as follows: EBOOKS,
GAMES, IMAGES, MOVIES, MUSIC.
6. Copy media files such as music (mp3) and movies (avi, mpg,
etc.) into the appropriate directory in the AV2 memory.
4.5
CONNECTING HEADPHONES
1. Connect the included 3060AV headphone to the headphone jack
on the bottom of the AV2.
2. Adjust the volume to the desired level in the Music or Movie
mode by playing music or a movie file and using the D-Pad Up
and Down to increase or decrease the volume level.
3. By default, the 85 dB limiter is enabled and set for the included
3060AV headphones. To disable or change the 85 dB SPL limiter
setting, go to Settings -> System settings -> Audio Limiter. Then
select the desired preset. By default, Preset 1 is enabled and set
for the 3060AV headphone included with the AV2. Preset 2 is set
for use with the 3060AV-S and Preset 3 turns off the limiter. To
use the limiter function with other Califone headphones, contact
Califone Technical Support.
CAUTION: Avoid excessive volume for long periods of time as
this can result in hearing damage.
CAUTION: The 85 dB SPL Limiter will only work with
headphones/headsets specifically sold by Califone for use with
the AV2. Check with Califone to see if your headphone/headset
is compatible with this feature.
4.6
CONNECTING TO A TV/PROJECTOR/SPEAKERS
1. The AV2 may be connected to a television, projector and/or
amplifier/speakers using the included 3.5mm to RCA A/V cable.
2. Connect the cord to the TV OUT jack on the bottom of the AV2
and then connect the RCA cables to the desired device.
3. Open Settings -> System Settings -> Video Output and change
it to TV_NTSC or TV_PAL depending on the local television
standard (Note: USA uses NTSC and Europe uses PAL)