Califone DMS1 User Manual - page 4
califone.com
6
califone.com
7
4. SETUP AND INSTALLATION
4.1 SPEAKER SETUP
1. Ensure that the power switch on teh back of the subwoofer is in
the OFF position.
1. Ensure that the voltage on the power adapter corresponds to the
AC voltage of your local area.
2. Unravel the AC line cord and insert plug into the AC outlet.
3. Insert the other end into the power jack on the rear of the
subwoofer.
4. Connect the RCA plugs for the left and right satellite speakers
to the cooresponding “SPEAKER OUTPUT” jacks on the
subwoofer.
5. Using the included cable, connect the output of the PC or other
A/V equipment (mp3 player, boombox headphone output, etc.) to
the AUDIO INPUT jacks on the rear of the subwoofer.
5. BASIC OPERATION
5.1 SPEAKER OPERATION
1. Switch on the power using the power switch on the back of the
subwoofer. The POWER LED on the front of the subwoofer
should light red.
2. Adjust the output volume of the PC or A/V equipment to about
3/4 volume. Then slowly increase the volume of the DMS1 usng
the volume knob on the front of the subwoofer until the volume is
at the desired level.
3. Use the treble/bass controls to adjust the audio quality.
CAUTION: Avoid excessive volume for long periods of time as this can
result in hearing damage.
6. TROUBLESHOOTING
No sound
•
Check that the power LED on the subwoofer is ON. If not,
check the power connections and that the power switch is
in teh ON position.
•
Check that the audio cables are well connected and the
audio output from the PC or A/V device is working.
7. SPECIFICATIONS & FEATURES
Power requirements
120VAC/60Hz -> 9VAC/1000mA power
adapter
Channels
2 Channel (Stereo)
Frequency Response
80 Hz - 20 kHz
Sensitivity
87 dB / W*m
Speakers
Satellite Speakers: 3” / 4 ohm
Subwoofer: 4” / 8 ohm
Rated / Max Output Power
Satellite Speakers: 1 W / 3 W
Subwoofer: 3W / 5W
Total: 5W / 11W
S/N Ratio
> 45 dB
Product Dimensions
Satellite Speakers: 3.75” x 4.25” x 5.75”
Subwoofer: 9” x 6” x 10.75”
Product Weight (incl. accessories)
5 lbs 7 oz
8. WARRANTY
Califone warrants this product to be free from defective material and
workmanship for one year from the purchase date. Our “Project
Intercept” Customer Satisfaction program will replace defective parts and
repair malfunctioning equipment under this warranty when the defect
occurs under normal use.
All Damage Claims Must Be Made With the Freight Carrier
Notify the freight carrier immediately if you observe any damage to the
shipping carton or product. Repack the unit in the carton and await
inspection by the carrier’s claim agent. Notify your dealer of the pending
freight claim.
Returning Your Unit for Service or Repairs
Should your unit require service, contact our Customer Service
Department online at califone.com/techsupport or via email
warranty@califone.com or by phone at 800-722-0500 / 818-407-2400
to first obtain an RA (Return Authorization) number before returning it to
Califone. The unit must be returned to our factory via prepaid
transportation only after the factory issues an RA number, which must be
clearly written on the outside of the box.
DMS1 Manual - JH 2010.02.26.indd 6-7
3/5/2010 2:00:38 PM