Califone NC500TFC User Manual - Travel & Storage
4
• Identify the left (L) and Right (R) designations located on each side of the headband. The headband
adjusts for a comfortable fit by sliding the top and side of the headband apart as seen in the photo.
• Place one hand on the top of the headband and the other hand on the side of the headband and
pull in opposite directions to adjust the size of the headband, and then, place them on your head.
• Now you can make minor adjustments to create a comfortable fit.
Note: Pulling down aggressively on the ear cups can damage the headphone. You may want to make several small
adjustments to achieve a perfect fit. Always wear the headphones so the cable is positioned on your left.
For protection during travel or storage, the headphone
folds flat inside its hard shell protective carrying case.
To store the headphones, do the following:
1. Identify the left (L) and Right (R) designations located
on each side of the headband.
2. Hold the headphones with two hands with the Left (L) ear
cup in your left hand. You should be able to see the power
indicator LED and the ON/OFF switch.
3. Gently turn the ear cups away from you and in opposite directions to
place the headphone in its protective carrying case. If the ear cups do not
turn, stop immediately. Forcing the ear cups may cause them to break.
4. Zip closed the carrying case to protect your headphone from damage.
Adjusting the Headphone for Comfort