Call Saint TM-PA009B User Manual - User Guide
Page | 10
User Guide
Press the “SET” button on the call blocker to save the dialling code.
The screen on the call blocker will display “BLACKCODE2” followed by
“- - - - - “
To add another dialling code, using your telephone, enter the dialling
code you want to block and then press the “SET” button on the call
blocker.
If you have finished adding dialling codes, hang up your telephone and
the call blocker will return to the main screen after a few seconds.
Unblock incoming dialling codes
Press “SET” on the call blocker. The screen will display “SET 123456”.
Pick up your telephone so you can hear a dial tone (if you are using a
cordless telephone, press the call button).
Press “4” on your telephone.
The screen on the call blocker will display the blocked dialling code.
Hang up your telephone.
Use the “SET” button on the call blocker to find the dialling code you
want to unblock.
Press “DEL” on the call blocker.
The screen will display “BLACKCODE” followed by “- - - - - “
The blocked dialling code is removed from the blocked caller list.
If you have finished unblocking dialling codes, the call blocker will
return to the main screen after a few seconds.
Block anonymous & withheld numbers
Press “SET” on the call blocker. The screen will display “SET 123456”.
Pick up your telephone so you can hear a dial tone (if you are using a
cordless telephone, press the call button).
Press “5” on your telephone.