Summary of ZJ-41E2
Page 1
Watch wireless calling receiver user manual.
Page 2: I Preface
Watch wireless calling receiver i preface the product concentrates the technology of wireless transportation, digital identify, dot matrix lcd display and microprocessor together to realize the functions of time display and wireless calling. The product uses removable rechargeable battery with long ...
Page 3: III Technical Data
Iii technical data 1) working voltage: dc3.7v rechargeable li-poly battery 2) working frequency: 433.92mhz 3) working current: 57ma±10ma (buzzer mode) 95ma±10ma (vibration mode) 4) standby current: 5) power-off current: 180±5μa 6) receiving sensitivity: -108dbm 7) decoding: learning code 8) modulati...
Page 4: 2. Diagram of Display
Press the button 3s to enter settings; in pairing setting, press the button to change the cursor position; in deleting setting, press the button to delete one paired call button. In calling status, press the button to delete one calling record. Press the button 3s to power on/off the receiver; press...
Page 5: 3. Diagram of Settings Menu
3. Diagram of settings menu button define define call button pin function button word each button displayed word can be changed advanced mode if off, only work 1/2/3/4-button call buttons back light time back light time 5~15s prompt times vibration or buzzer prompt time 1~10 times general mode digit...
Page 6: V Using Method
V using method 1. Wear the watch receiver to the wrist, and put the call buttons in suitable place. 2. Press "pow" 1s button to power on. 3. Pair the call buttons with the watch receiver. (refer to below instruction) 4. When need calling service, press the call buttons, the watch receiver will recei...
Page 7: 1.General
Status, press “set” button 3 sec to enter settings. The main settings are: 1.General in general settings, set the basic function of the watch receiver. Each call button has one id number, on the call buttons, there are one or more press buttons, each buttons has different data pins as below: 1) butt...
Page 8: 2. Pair Buttons
3) advanced mode: if not open advanced mode, the watch receiver only receive the d0/d1/d2/d3 data. 4) back light times: set back light time from 5s to 15s. 5) prompt time: set vibration or buzzer times from 1 to 10tims. 2. Pair buttons 1) pairing call button in pairing settings, there are 2 pairing ...
Page 9: 3. Delete Buttons
3. Delete buttons there are 3 ways to delete paired call buttons: 1) list del button: in this mode, all the paired call buttons are showed in the list, you can select one by one and press [set] button to delete. 2) search del button: if there are too many paired call buttons, it is hard to select on...
Page 10: 6. Display Order
16-01-08 fri date & time 12:00 2) list: all the calling records display in the list, each page displays 3 records. Press [up/down] button to page up/down. If one call button called many times, only one record and calling times are showed. 3) list all: same to “list” function, but if one call button ...
Page 11: 10. Restore Default
10. Restore default there are 3 options, select one and press [set] button to restore. 1) no – nothing restored. 2) restore part – only system settings are restored to factory default except pairing information. 3) restore all – all settings will be restored to factory default including pairing info...
Page 12: Viii Faq
Viii faq ix packing list 1) watch receiver 1pc 2) power adapter 1pc 3) usb cable 1pc 4) user manual 1pc 5) warranty card 1pc 11 some call button has less distance battery of call button is close to empty the watch receiver cannot be charged call buttons cannot be paired the frequency is not same or ...