CallingSYS ZJ-48 User Manual - Operation Instruction
Operation Instruction
1
. Self test when power on
When the receiver host is power on, it starts initialization program. The 48 LED
indicators flicker along with 3 sounds doorbell, and then the power LED on.
2
. Function settings
At first use, please do the settings like below.
First press
【STUDY/SET】button to enter “working mode settings”, second
press the button to enter “pairing settings”, third press the button to quit
settings.
(1) Working mode settings
There are 10 different working modes which are corresponding LED indicator
from 1 to 10. Press
【UP/DOWN】button to select the mode. When press the
button, it sounds the call number and corresponding voice.
For example, select mode 3,
Press button A, it sounds “No. xx medicine”;
Press button B, it sounds “No. xx call”;
Press button C, it sounds “emergency”;
Press button “Cancel”, the calling information will be cleared.
Note:
1) mode 4 ~ 10 is used for 1-button / 2-button transmitter.
2) in mode 7~10, when there is call, it sounds “Room xx call”, “Floor xx call”...
3
Item
Working mode
Button A
Button B
Button C
Cancel
1
General mode
Music 1
"Dingdong"
Music 2
x
2
Restaurant mode
Order
Call
Checkout
x
3
Hospital mode
Medicine
Call
Emergency
x
4
Medicine mode
-
Medicine
-
x
5
Emergency mode
-
Emergency
-
x
6
Help mode
-
Help
-
x
7
Ward mode
-
Ward
-
x
8
Room mode
-
Room
-
x
9
Sickbed mode
-
Sickbed
-
x
10
Floor mode
-
Floor
-
x