To pair a Bluetooth audio device to the
Drone,first put the Bluetooth device into
discovery mode. (You may need to
refer to the device’s user manual).
Once the device is in discovery mode,
press and hold the pairing button on
the Drone ( ) until the LED lights red
followed by an alternate flashing of
blue and red lights. The Drone will begin
pairing to the device automatically
and store the device’s address in its
memory.
3
Restoring Default Settings
(Windows XP)
If you do not want the drone to be the
default audio input/output device, you
must manually change the settings in your
audio preferences.
Pairing the Drone to a
Bluetooth audio device
The Drone pairs automatically to any
Bluetooth audio device that is both in
range and in discovery mode. The Drone
can store up to 5 Bluetooth
®
addresses in its
memory for quick-pairing at later times.
Quick Pairing with
Previously Paired
Bluetooth Devices
®
®
Click “Start > Control Panel > Sound and
Audio Devices” to bring up your audio
menu.
Click the Audio tab.
Your default input and output devices
can be selected from the drop-down
menus of the “Sound Playback” and
“Sound Recording” sections.
1.
2.
3.
To pair the Drone with a previously paired
device, quickly press the pairing button on
the Drone ( ) with the audio device in
discovery mode.
1.
2.