Cam Spray 1000MX Operator's Manual

Manual is about: MX series; MXD series, Wall Mount Style series

Summary of 1000MX

  • Page 1

    Operators manual for mx, mxd and wall mount style models features general pump features cat pump wall mount style models models offered are: 1000wm and 1500wm with painted frame 1000wm/ss and 1500wm/ss with stainless steel frame. Models are: 1000mx, 1500amx, 1500mx and 20005mx models are: 1000mxds, ...

  • Page 2

    Thank you... .....For selecting our products. Our personnel have proudly made every effort to ensure that your new pressure washer is of the quality that you expect. But things do occasionally go wrong. This is why every pressure washer is covered by a limited warranty. Among other things this warra...

  • Page 3

    Warning the following warnings must be followed, failure to follow these warnings could result in serious personal injury or death! Electrical equipment can cause shock and sparks. Do not bypass or remove the grounding prong in any electrical plug. Keep electrical plugs, connections and cords out of...

  • Page 4

    When you receive your pressure washer be sure you check for concealed freight damage. Any damage should be noted with the delivering carrier. If you have any questions related to freight call the 800 number listed in the front of the manual. Check oil levels in the pump. Failure to check levels will...

  • Page 5

    During operation nozzles chemical injector use. Calibration hoses and couplers the pressure was set at the factory during the testing procedure, no adjustments to the machine should be required for operation. During operation do not leave the machine running for more than 2 min- utes without the tri...

  • Page 6

    Shut down procedure 1. Turn off the power switch on the pressure washer. 2. Relieve pressure on line by pulling trigger gun. 3. Shut off water supply and disconnect garden hose. 4. Be sure to check for water leaks or oil leaks that should be repaired before the next operation. 5. If you are going to...

  • Page 7

    Mx and mxd gun wand assembly part number description 542081 mx and mxd gun wand half 542082.1 mx and mxd wand half 510065 1/4” quick coupler for all units 510100 o-ring for 1/4” quick coupler and twist fast for all units 509372 wall mount gun 509370 wall mount lance flow 2.0 gpm 2.0 gpm 3.0 gpm 3.0 ...

  • Page 8

    2sfx pump 7500x unloader parts list item part number description qty 402 cat 540081 cap, hex adjusting 1 404 cat 31047 nut, locking(optional) 1 408 cat 32094 spring, coil (2000 psi) 1 410 cat 107672 retainer, spring 1 412 cat 45694 stem, piston (m5) 1 414 cat 20184 back up ring 1 415 cat 14190 o-rin...

  • Page 9

    This pump uses 30 wt. Oil tt series (gas / electric) pos. Code description kit no. Qty 25 90357200 o-ring 3 26 90502200 anti-ext ring 3 27 96707000 flinger washer 3 28 n/a wrist pin 3 29 51160022 back cover 1 30 99186700 screw 4 31 n/a o-ring k100859 1 32 n/a connecting rod 3 33 n/a piston guide 3 3...