Cambium Networks cnPilot E500 Quick Start Manual

cnPilot™ E500

All E500 Models

Quick Start Guide

Introduction

This sheet details assembly and 

installation of cnPilot E500.

Package Contents

Step 1 

(Pole Mount)

Step 2 

(Pole Mount)

Tools Required

 - Phillips screwdriver (Wall mount)

 - Flat-head screwdriver (Pole mount)

Step 3 

(Pole Mount)

Wall Mount 

(No Bracket)

Step 1

(Wall Mount w/bracket)

Step 2

(Wall Mount w/bracket)

Turn sheet over to continue.

Insert the mounting straps through the 

mounting bracket.

Tighten the mounting straps around the 

pole using a flat-head screwdriver.

Attach the cnPilot E500 to the mounting 

bracket.

Attach the mounting bracket to the screws.

Insert the wall anchors into the wall using 

the mounting bracket as a template and 

insert the screws. Attach the cnPilot E500 to 

the screws.

Insert the wall anchors into the wall using 

the mounting bracket as a template and 

insert the screws. 

 - E500 access point - x1

 - E500 pole/wall mount bracket - x1

 - 56V/30W gigabit passive PoE  

    power injector - x1

 - Wall-mounting screw kit - x1

 - RJ45 IP67 gland connectors - x2

 - AC power cord (not for RoW SKU) - x1