1 cambo ® wide rs 1200 series cambo instruction manual wide rs 1200 series ® e rev-10-2012.
2 copyright © 20 12 cambo fotografische industrie. All rights reserved. Revised 15-10-2010
3 cambo ® wide rs 1200 series cable release mount strap mount horizontal shift drive knob horizontal shift indication spirit levels cambo accessory mount strap mount cable release mount tripod mount 3/8” (removable) lens panel lock lens panel lock mount led light hand grip wide rs camera body hand g...
4 thank you for purchasing a cambo product. The wide rs is a compact medium format system camera featuring lateral and vertical shift of the rear standard. The precision rear shift/rise and fall control is ideal for architecture and landscape photography. It enables the photographer the use perspect...
5 cambo ® wide rs 1200 series a. Mounting the lens panel the wide rs system is compatible with the cambo wds/wts lens panels. 1. Open both lens panel locks 2. Slide the bottom of the lens plate into the lens panel slot 3. Tilt the lens panel flat to the camera body 4. Lock both lens panel lock b. Mo...
6 1. Open both interface adapter locks 2. Slide the bottom of the interface adapter into the interface plate slot 3. Tilt the interface adapter flat to the camera body 4. Lock both interface adapter locks note: the interface adapter can be mounted with or without the digital back attached. The inter...
7 cambo ® wide rs 1200 series the mechanical shutter must be cocked between every exposure. Wds lens panels featuring the schneider® or rodenstock® electronic shutter are avail- able on request. D. Mounting the digital back please choose the slw interface adapter corresponding to the interface mount...
8 hand back side of the horizontally moving plate which are always visible from behind the camera, independent of the position of the plates. G. Tripod mounting block the wide rs comes with a removable tripod mounting block, which is already mounted in place. It is equipped with a 3/8” thread. The h...
9 cambo ® wide rs 1200 series ing block allows the user to take full advantage of the 25mm vertical shift when mounted on a larger tripod. However, to minimise the size of your camera, the mounting block can be removed by loosening the two tripod mount screw knobs. With the mounting block removed yo...
10 j. Use of lens panels each lens has a defined image circle and viewing angle specified by the lens manufacturer. The indicated image circle is defined by the circle containing acceptable image quality, defined by the quality standards of the lens manu- facturer. Cambo does not change these specif...
11 cambo ® wide rs 1200 series k. Wts tilt-swing lens panels the wts panel allows an angle adjustment between +5 and -5 degrees in both swing and tilt direction for setting scheimpflug corrections. These can be used separately as well as simultaneously, using the 2 adjustment knobs. The lens plane a...
12 this instruction manual has been prepared with care. However, cambo fotografische industrie bv can ac- cept no responsibility, financial or other for any consequences arising out of the use of this material. All specifications in this manual are subject to change without notice. Please check www....