1 cambo ® wide rs 5000 series instruction manual e rev-11-2012 wide rs 5000 series ® cambo.
2 copyright © 2012 cambo fotografische industrie. All rights reserved. Revised 15-10-2010
3 cambo ® wide rs 5000 series interface adapter frame horizontal shift knob horizontal shift indication spirit levels cambo accessory mount rise/fall drive knob tripod mount 3/8” (removable) spirit levels interface adapter lock interface adapter lock spirit level retainer interface plate hand grip k...
4 thank you for purchasing a cambo product. The wide rs is a compact medium format system camera featuring lateral and vertical shift of the rear standard. The precision rear shift/rise and fall control is ideal for architecture and landscape photography. It enables the photographer the use perspect...
5 cambo ® wide rs 5000 series a. Mounting the lens panel the wide rs system is compatible with the cambo wds/wts lens panels. Please note: the image shows the wrs-1200 body which features the same mounting system as the wrs-5000. 1. Open both lens panel locks 2. Slide the bottom of the lens plate in...
6 please note: the image shows the wrs-1200 body which features the same mounting system as the wrs-5000. All interface plates are interchangeable. 1. Open both interface adapter locks 2. Slide the bottom of the interface adapter into the interface plate slot 3. Tilt the interface adapter flat to th...
7 cambo ® wide rs 5000 series a copal 0 shutter, with shutter speeds between 1/500 and 1 second, b and t. The mechanical shutter must be cocked between every exposure. Wds lens panels featuring the schneider® or rodenstock® electronic shutter are avail- able on request. D. Mounting the digital back ...
8 g. Tripod mounting block the wide rs comes with a removable tripod mounting block, which is already mounted in place. It is equipped with a 3/8” thread. The height of the mount- ing block allows the user to take full advantage of the 25mm vertical shift when mounted on a larger tripod. However, to...
9 cambo ® wide rs 5000 series knobs. With the mounting block removed you can use the integrated 3/8” mount in the bottom frame of the main housing. G2. Wrs-333 level head the optional wrs-333 level head replaces the original mount. The wrs-333 can be fine-levelled with 3 individual thumb screws, 2 f...
10 j. Use of lens panels each lens has a defined image circle and viewing angle specified by the lens manufacturer. The indicated image circle is defined by the circle containing acceptable image quality, defined by the quality standards of the lens manu- facturer. Cambo does not change these specif...
11 cambo ® wide rs 5000 series k. Wts tilt-swing lens panels the wts panel allows an angle adjustment between +5 and -5 degrees in both swing and tilt direction for setting scheimpflug corrections. These can be used separately as well as simultaneously, using the 2 adjustment knobs. The lens plane a...
12 this instruction manual has been prepared with care. However, cambo fotografische industrie bv can ac- cept no responsibility, financial or other for any consequences arising out of the use of this material. All specifications in this manual are subject to change without notice. Please check www....
