Main operating instructions x2-pro digital solutions.
2 1. Introduction cambo now introduces the new generation technical camera that combines the latest technology of today’s digital slr cameras with full lens shift and tilt possibilities. These instructions give short information about the main functions of this new photographic system. 2. List of fu...
3 23. Safety knob lever lens plate 24. Bellows 25. Scale swing (tilt) 26. Scale rise & fall (lateral shift) 27. Scale focus 28. Front ring bellows (3c) 29. ¼” thumb screw (3f) instructions these instructions describe the main functions of the x2-pro camera system. Firstly the set-up of the camera in...
4 3b. Attaching camera to tripod or stand to mount the camera, attach the focus block (16) to your tripod or stand fitted with a 3/8” mounting thread. (note: use of a ¼-20 reducer bushing is not recommended.) secure tightly. If using a tripod head, level the camera using the spirit levels (15,18) in...
5 to take off the lensplate, be sure to hold it with one hand. Then push the safety knob (23) and push the lever at the indicated lens “button” (5b). 3f. Mounting dslr camera take the dedicated mountblock and mount it under the dslr camera using the ¼” thumbscrew (29). Before tightening it check if ...
6 the second column (1) is used for the lateral shift and tilt movements. The shift knob (2) gives 18mm left and right and the tilt range is like the swing 20 degrees both ways using the tilt knob (3). In the following overview of the “basic view camera movements” the use of the specific movements a...
7 5. Specifications body specifications: - weight (body only): 1.9 kg incl. Bellows and mount-block: 2,1kg - size (hxbxd): 26,3 x 29,3 x 19,5 cm. - front panel geared movements: horizontal shift: 17,5mm left, 17,5mm right vertical shift: 17,5mm up, 17,5mm down tilt angle: 20° up, 20° down swing angl...
