CAMBOARD CLK 100 Quick start manual

QS-1

CLK 100 • Quick Start

The Extron CLK 100 is a versatile, battery-operated LCD

clock with an integrated thermometer, ideal for

monitoring the ambient temperature within an

equipment rack or room. The CLK 100 is equally at

home in desktop or shelf top applications.

Features

• Alternately displays the current time and date.

• Time is displayed in either a 12- or 24-hour time

scheme.

• Measures temperature in one minute intervals.

• Temperature is displayed in Celsius or Fahrenheit.

The displayed temperature ranges from

-9° C to 50 °C or 16 °F to 122 °F.  If this range is

exceeded, the temperature display flashes.

Installing the Battery

1.

Remove the battery cover and install one AAA,

1.5 V battery.

2.

Align the battery with the diagram inside the

battery compartment.

3.

Replace the battery cover.

Installing the battery requires opening the

enclosure. To open the enclosure unscrew

the four side panel screws.

Buttons

Mode — 

Toggle between 12- or 24-hour time schemes.

Set

— 

Press the Set button to enter 

setup 

mode.  When

changing display values, use the Set button to

advance to the next display.

Up (Time/Date toggle) — 

When adjusting the CLK 100

display, press the Up button to increase display

value.

Once the CLK 100 is configured, press UP to turn off

the automatic toggle between time and date.

Down (°C/°F)

— 

When adjusting the CLK 100 display,

press the Down button to decrease display value.

In 

normal 

mode, press the Down button to toggle

between Centigrade or Fahrenheit temperature

displays.

Hour/Day

— 

Press the Hour/Day button to toggle

between time and date.

Reset

— 

Press the red Reset button to reset all displays

to default values.

Accessing these buttons may require

opening the enclosure. To open the

enclosure unscrew the four side panel

screws.

Setting the Display

1.

To change the display, press the Set button; the

flashing letters or numbers can be changed.  Use the

Up or Down buttons to change the value.

2.

To move to the next display, press the Set button

again.  Continue until the Year, Month, Day, Hour,

and Minute displays are set.

3.

To return to normal 

time/date

 mode, press the Set

button again.

Accessing display buttons may require

opening the enclosure. To open the

enclosure unscrew the four side panel

screws.

Mounting Instructions

The CLK 100 can be used as a stand alone clock or

mounted in an Extron 1U Universal Rack Shelf, as

shown below.

MODE

UP

SET

DOWN

HOUR/DAY

RESET

68-1183-01

Rev B

10-05

Quick Start — CLK 100

im Vertrieb von

            CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201

Fax 07131 911203

ce-info@camboard.de