CAMBRIDGE AIR100 User Manual - page 6
6
Top panel controls
1
2
3
6
7
4
5
1
Internet radio presets
We have preloaded Air with 10 of our favourite internet radio
stations. Presets 1-5 can be played by pressing the corresponding
preset button. To change the assigned stations use the free Air App
for Android or Apple devices, see later section.
2
Bluetooth button (Pairing)
Used to pair (connect to) Bluetooth devices so that they can be
played back wirelessly. When pressed, the front LED will blink blue
for approximately 30 seconds. This indicates that the system is in
pairing mode. See later section.
3
AUX button
Selects AUX/MP3 inputs. Pressing this button will toggle between
Aux and MP3 inputs.
4
Volume controls
Controls the player's volume.
5
Standby/On button
Controls the standby state of the unit. When the LED is illuminated
red, the system is in its low power standby state. When the unit is
first turned on, it takes approximately 20 seconds to fully power up
and become active. During this phase the LED on the front of the
unit will blink red on and off .
6
LED indicator/IR receiver (behind grille)
LED indicator
Standby
BT pairing mode
Internet Radio
Spotify
BT input
AUX input
AirPlay/DLNA
MP3 input
IR receiver
A clear unobstructed line of sight between the remote handset and
the IR receiver is required for reliable operation.
7
Port/Handle
The bass port doubles as a handle for moving your Air from room
to room. In use the port provides both an extended low frequency
response and cooling. The airflow in/out of the port should not be
obstructed.
6
(Air 100)
(Air 200)