CAMBRIDGE Pre-Packaged 2011 Instruction Manual

Manual is about: MaytRx Grill Module

Summary of Pre-Packaged 2011

  • Page 1

    Cambridge pre-packaged / pre-cut maytrx grill module instruction manual cambridge pre- empaquetado / pre-cortado manual de instrucciones para la prilla de maytrx pared.

  • Page 2: 2011

    2011 cambridge pre-packaged / pre-cut maytrx grill module 1 layer reference guide: guía de referencia: finished grade layer 7 layer 6 layer 5 layer 4 layer 3 layer 2 layer 1 4 ” concrete slab (4000 psi) foundation layer layer 8 2 3/8” above foundation 6 ”compacted 3/4” stone.

  • Page 3: 2011

    2011 cambridge pre-packaged / pre-cut maytrx grill module 2 tools required for kit installation: safety goggles ear protection dust mask gloves shovels (digging & flat) metal cutters (for banding on cubes) mason hammer (chipping & hammer) road stone rake tamper (hand or mechanical) wheelbarrow level...

  • Page 4: 2011

    2011 cambridge pre-packaged / pre-cut maytrx grill module 3 herramienta requerida para la instalación del kit: anteojos de seguridad protección auditiva máscara de polvo guantes palas (plano y de excavación) cortadores del metal (para congregar en los cubos) martillo del masón (que salta el & martil...

  • Page 5: 2011

    2011 cambridge pre-packaged / pre-cut maytrx grill module 4 note: a & y stones are the same stone, in some instances the stone is turned upside down for proper fit and installation. Each layer has denoted the proper orientation of the stone. Nota: las piedras de y y a son la misma piedra, a veces la...

  • Page 6: 2011

    2011 cambridge pre-packaged / pre-cut maytrx grill module 5 pyzique 4” cut stones: maytrx 6” cut stones: 6 1/4” pyzique cut stone (1 piece) 7” pyzique cut stone (1 piece) 10”x9 5/8” (1 piece) 10 1/8”x10” (4 pieces) 10”x9 7/8” (1 piece) s 8” (2 pieces) 10”x6 3/4” (1 piece) 10”x5 3/4” (1 piece) 6” ang...

  • Page 7: 2011

    2011 cambridge pre-packaged / pre-cut maytrx grill module 6 concrete base: call 811 for information on underground utility marking. The grill base is 10” deep by 80” long by 40” wide along the longest dimensions of the back side. (follow diagram for all dimensions when making the base). Excavate the...

  • Page 8: 2011

    2011 cambridge pre-packaged / pre-cut maytrx grill module 7 layer 1: piece count = (4) corners, (13) a stones, (2) y stones, (2) x stones. On the concrete base pad, mark a line 4” from the edge on all sides. This line designates the out- side perimeter of the wall stones. Apply concrete adhesive and...

  • Page 9: 2011

    2011 cambridge pre-packaged / pre-cut maytrx grill module 8 layer 2: piece count = (4) corners, (1) a stone, (4) b stones, (3) y stones, (4) x stones, (1) 10 1/8”x10” cut stone, (1) 6” angle cut stone, (2) pyzique stones, (1) 7” pyzique cut stones, (1) 6 ¼” pyzique cut stone. Apply concrete adhesive...

  • Page 10: 2011

    2011 cambridge pre-packaged / pre-cut maytrx grill module 9 layer 3: piece count = (4) corners, (1) a stone, (4) b stones, (3) y stones, (4) x stones, (1) 10 1/8” x10” cut stone, (1) 6” angle cut stone. Apply concrete adhesive and install the wall stones and cut stones as shown in the photo, keeping...

  • Page 11: 2011

    2011 cambridge pre-packaged / pre-cut maytrx grill module 10 layer 4: piece count = (4) corners, (1) a stone, (4) b stones, (3) y stones, (1) x stones, (2) 8” angle cut stones, (1) 10 1/8”x10” cut stone, (1) 6” angle cut stone. Apply concrete adhesive and install the wall stones and cut stones as sh...

  • Page 12: 2011

    2011 cambridge pre-packaged / pre-cut maytrx grill module 11 layer 5: piece count = (4) corners, (1) a stones, (4) b stones, (3) y stones, (2) x stones, (2) 8” angle cut stones, (1) 10 1/8”x10” cut stone, (1) 6” angle cut stone. Apply concrete adhesive and install the wall stones and cut stones as s...

  • Page 13: 2011

    2011 cambridge pre-packaged / pre-cut maytrx grill module 12 pegue las virutas de la chapa al dintel y deje seco antes de la instalación glue veneer pieces to the lintel and let dry prior to installation.

  • Page 14: 2011

    2011 cambridge pre-packaged / pre-cut maytrx grill module 13 layer 6: piece count = (4) corners, (1) a stone, (4) b stones, (2) y stones, (2) x stones, (2) 8” angle cut stones, (1) 9 5/8”x10” cut stone, (1) 5 ¾”x10” cut stone, (4) 4” pyzique veneer cuts, (1) 4” x 8” x 40” lintel. Apply concrete adhe...

  • Page 15: 2011

    2011 cambridge pre-packaged / pre-cut maytrx grill module 14 layer 7: piece count = (4) corners, (1) a stone, (4) b stones, (2) y stones, (2) x stones, (2) s8” cut stones, (1) 9 7/8”x10” cut stone, (1) 6 3/4”x10” cut stone. Apply concrete adhesive and install the wall stones and cut stones as shown ...

  • Page 16: 2011

    2011 cambridge pre-packaged / pre-cut maytrx grill module 15 grill module granite countertop installation: 1.Once all the wall block has been set, it is time to install the counter tops. There are 3 pieces in the kit, make sure you have enough people to help with the panels due to the weight of each...

  • Page 17: 2011

    2011 cambridge pre-packaged / pre-cut maytrx grill module 16 *see page 15 for granite installation. *vea página 15 del para la instalación del granito. Layer 8 p ie ce # 1 p ie ce # 3 piece #2.

  • Page 18: 2011

    2011 cambridge pre-packaged / pre-cut maytrx grill module 17 install grill assembly as per manufacturer’s details and instructions. Instale el montaje de la parrilla según los instrucciones y detalles del manufacture. 1 5/8”.

  • Page 19: 2011

    2011 cambridge pre-packaged / pre-cut maytrx grill module 18 cambridge appliance installation: (*note: not all kits will include every appliance mentioned below.) instalación de la aplicación de cambridge: (*note: no todos los kits incluirán cadaaplicaciónabajo.) 38” brahma grill (o.E. Wall & maytrx...

  • Page 20: 2011

    2011 cambridge pre-packaged / pre-cut maytrx grill module 19 stainless steel double door (o.E. Wall & maytrx kitchens, o.E. Wall & maytrx grill modules) slide doors up and out of the hinges. Fit the door frame in opening of wall block under the grill. Once the door is centered, mark holes through th...

  • Page 21: 2011

    2011 cambridge pre-packaged / pre-cut maytrx grill module 20 puerta del aacero inoxidable (o.E. Pared & cocinas de maytrx, o.E. Pared & maytrx módulos de la barra) resbale la puerta encima y fuera de las bisagras. Quepa el marco de puerta en la abertura del bloque de la pared debajo del fregadero. U...

  • Page 22: 2011

    2011 cambridge pre-packaged / pre-cut maytrx grill module 21 30” stainless steel bar center (o.E. Wall & maytrx bar modules) install faucet setup to the bar center sink base. Place the bar center into the opening on the granite coun- tertop. Secure bar center to the countertop using clips provided w...

  • Page 23: 2011

    2011 cambridge pre-packaged / pre-cut maytrx grill module 22 elevations front right left rear.