Cambridge SoundWorks BassCube 6S User Manual - page 4
WIRING DIAGRAM
4
The BassCube 6S is designed to connect in parallel
with the satellite speakers to the main Left and Right
speaker outputs of your receiver or amplifier. This par-
allel connection may be made at the Receiver,
Subwoofer, or Satellite speaker terminals. Making this
connection at the receiver is recommended since this
usually results in the least overall resistance in the
wiring to all of the loudspeakers. However, in some
installations it may be more convenient to make the
parallel connection at the Subwoofer or Satellite terminals.
No external crossover circuitry is necessary when
using Cambridge SoundWorks satellite loudspeakers
because it is already included within the loudspeak-
ers. Due to the action of the crossover components in
the satellites, this connection results in a load that will
be safe for virtually all high-quality receivers.
R
L
+
+
+
–
+
–
BassCube 6S
Receiver
Left Speaker
Right Speaker
BassCube 6S Manual 5/24/02 1:29 PM Page 4