Cambridge SoundWorks Henry Kloss 12 Instructions Manual

Manual is about: Transportable Component Music System

Summary of Henry Kloss 12

  • Page 1

    The model twelve transportable component music system by henry kloss contents safety precautions ................................................................................. I, ii introduction ............................................................................................. 1 unpack...

  • Page 2

    The exclamation point within an equilateral triangle is intended to alert the user of the presence of important operating and main- tenance (servicing) instructions in the lit- erature accompanying this product. Caution: to prevent electric shock, match wide blade of plug to wide slot, insert fully....

  • Page 3

    Important safety instructions read instructions - all safety and op- erating instructions should be read before the model twelve is operated. Retain instructions - the safety and operating instructions should be retained for future reference. Heed warnings - all warnings on the amplifier and in the ...

  • Page 4

    T introduction hank you for choosing the model twelve transportable component music system. In most respects, you will find frequency unit provide far greater placement flexibility than conven- tional speakers. Place them casually, and chances are model twelve will sound good. But take the time to e...

  • Page 5

    1. If you suspect that your model twelve has been damaged in shipping, do not connect and use the unit. Call us right away for advice, and be sure not to discard any packing materials in case the unit has to be returned. 2. To open model twelve, place it on a flat surface with its round bass speaker...

  • Page 6

    Connections 1. Power connection. Model twelve’s amplifier operates from a 12-14 volt dc source. A plug-in adapter for use with 120 v, 60 hz ac household current is supplied. Also, a connecting cable for powering the amplifier from a vehicle’s 12 vdc, negative ground electrical system, is supplied (s...

  • Page 7

    4 + + + + i n p u t – + connect the leads with the red bands to the red (+) speaker terminals on the amplifier and basscase, and the unmarked leads to the black (-) terminals. Note: connecting all speaker wires identically assures that the speakers operate “in-phase” (their cones move in and out tog...

  • Page 8

    5 controls 1. Front panel controls. The front panel controls (shown below) operate like a typical stereo system. The bass and treble controls operate only at the frequency extremes to prevent mid- range coloration. 2. Rear panel bass level control. The bass level control allows for adjustment of the...

  • Page 9

    6 speaker placement to take full advantage of model twelve’s unique design, experi- ment with speaker placement. Satellites 1. Good stereo sound places the performers on a sound “stage” across from the listening area. With model twelve, that stage is best set by placing the satellites to form an app...

  • Page 10

    7 difficulty if you suspect that there’s a problem with your model twelve, contact the store where it was purchased, or call a cambridge soundworks audio/video consultant, who will help you track down the problem. If together you agree that there is something wrong with your model twelve, the consul...

  • Page 11

    311 needham street, newton ma 02464 1-877-937-4434 fax: 617-527-3194 www.Cambridgesoundworks.Com email: info@cambridgesoundworks.Com p81-1400 0400 a company.