1. DL manuals
  2. Cambridge SoundWorks
  3. Speakers
  4. Henry Kloss Tower 3
  5. Instructions Manual

Cambridge SoundWorks Henry Kloss Tower 3 Instructions Manual

Manual is about: Cambridge Soundworks Tower 3: User Guide

Summary of Henry Kloss Tower 3

  • Page 1

    Introduction ........................................................................................ 1 overview ............................................................................................. 2 unpacking and checking for shipping damage ................................. 2 speaker plac...

  • Page 2

    T hank you for purchasing the tower iii speakers by henry kloss. They showcase the lifetime of experience henry kloss brings to speaker design. Henry kloss examined all facets of speaker design to ensure the highest performance possible. This includes cabinet shape and construction, driver size and ...

  • Page 3

    2 overview read through this manual before starting to install your speakers. Decide where to place the tower iii speakers in your listening room. Afterwards, you will prepare the speaker wires, connect and listen to the speakers. When you are satisfied with the sound, you may conceal the wires. 1. ...

  • Page 4

    5" laser disc 102.7 3 speaker placement a tower iii speakers are magnetically shielded, so they may be placed next to a tv. Most movie soundtracks sound best with the speakers positioned to form a 45 o angle (see a, below). If this places the speakers too close to the tv, move them further out. Avoi...

  • Page 5

    4 speaker hook-up after you have determined placement (page 3 - 4), it’s time to connect your speakers to the receiver or amplifier. Use at least 16-gauge stranded copper wire for runs of up to 25 feet, and heavier gauge for longer runs. Preparing speaker wires • use a wire cutter/stripper to cut sp...

  • Page 6

    5 the two leads of each speaker wire are differentiated by a ridge or color stripe down one lead’s insulation, and/or the use of different color wire (copper and silver). • unscrew two of the speakers’ red (+) and black (–) connectors to expose the holes in their threaded shafts. • insert the stripp...

  • Page 7

    6 optimizing the sound of your system a small change in speaker placement can have a large effect on the sound. Program material varies greatly, so be sure to listen to a variety of recordings to prevent being misled by unusual character- istics of a particular recording. Let your ears be the guide,...

  • Page 8

    7 each speaker comes with four carpet spikes. These spikes can be used to improve stability on thick carpet. They will penetrate a carpet and carpet pad and transfer the weight of the speaker directly to the actual floor surface. Important note: these carpet spikes will leave four small but distinct...

  • Page 9

    8 10-year limited warranty to ensure warranty coverage it is incumbent upon the original purchaser to inform cambridge soundworks or any of its autho- rized service agencies of the defect within the warranty period. The only acceptable method of establish- ing warranty status is a copy of the origin...

  • Page 10

    311 needham street, newton ma 02464 1-877-937-4434 fax: 617-527-3194 www.Cambridgesoundworks.Com email: info@cambridgesoundworks.Com p81-1420 0400 a company.