S100 multipole surround speakers user manual ® ™ ™.
2.
3 introduction thanks for choosing a newton series surround loudspeaker. The s100 features the finest drivers, precision internal crossover circuitry and an elegant enclosure design. The product development team at cambridge soundworks believes there is no better combination of audiophile-level atte...
4 positioning your speakers the following suggestions assume you have some flexibility regarding where you place your speakers. Don’t be too concerned if your situation and listening environment dictate the speakers’ position. As long as each surround speaker is on the left or right half of the list...
5 hang the s100 directly on a wall: install a no.10 screw in the wall so that its screwhead protrudes about 3/8 inch. Cambridge soundworks supplies screws and plastic anchors for your conven- ience, but it is the installer’s responsibility to insure the screw is securely mounted. Apply the soft, sel...
A small, purpose-built shelf can be used instead of hanging the speakers from a screwhead. In this case, we recommend you apply the soft, self-adhesive feet to bottom of the enclosures. The feet protect the finish of the speakers or the surface and improve stability if the surface is not perfectly f...
7 7 about multipole technology the multipole capability of your s100 speakers lets you enjoy different types of surround programs at their best. The descriptions that follow assume you will position your surround speakers to the left and right of the listening area and not directly behind it. Dipole...
8 8 use at least 18 gauge speaker cable for short runs (under 15 feet). Use 16 gauge or heavier speaker cable for longer runs. 1. Determine how long the speaker cable should be for each speaker. Cut the speaker cable into the appropriate lengths. 2. Strip 1/2 inch of insulation from the two individu...
9 9 dimensions: 4 5/16"h x 7 7/8"w x 4 5/16"d weight: 3 pounds each the s100 can be safely used with any surround receiv- er rated above 25 watts per channel. There is little advantage gained in using more power than 100 watts per surround channel, but amplifiers above this power rating can be used ...
10 10
P81-2050 rev a.
