T100 tower loudspeakers newton series ™.
Introduction thanks for choosing a newton series loudspeaker. The t100 features the finest drivers, precision internal crossover circuitry and an elegant enclosure design. The product development team at cambridge soundworks believes there is no better combination of audiophile-level attention to de...
2 stand and foot assembly attach the stands to the base of each speaker using three bolts for each stand (see diagram). The stands are identical. Tighten the bolts securely. Choose which foot option is correct for your situation: disc feet: the disc feet insure stable speaker place- ment on most fla...
3 disc feet installation: 1. Install the pointed end of a threaded post into the end of each arm of the metal stands. Twist and hand tighten each post. 2. Thread a lock nut most of the way up each post. 3. Screw a disc foot onto the end of each post about seven complete turns. 4. Apply the self-adhe...
4 for a two channel system (stereo), place the speakers to form an angle between 25 and 55 degrees with your listening position. For a home theater system, place the speakers close to the left and right sides of the monitor. This helps create a cohesive sonic presentation across the left, center and...
5 speaker wire preparation the t100’s can be driven from a receiver, an integrat- ed amplifier or a preamp/power amplifier component system. This manual refers to a “receiver” throughout, but all the instructions apply to integrated amplifers or preamp/power amplifier setups as well. Use at least 18...
6 making the connection 1. Unscrew the speaker’s red and black connector knobs to expose the holes in their threaded shafts. 2. Insert the stripped end of one cable’s “indicated” conductor into the speaker’s red (+) connector. Hand-tighten the knob to secure the connection. Make sure no stray strand...
7 specifications dimensions (h x w x d): 32 1 / 2 x 7 3 / 8 x 12 1 / 2 inches (825 x 186 x 320 mm) base width: 11 3 / 16 inches (284mm) weight: 34 pounds the t100 can be safely used with receivers rated above 20 watts per channel. There is little advantage to using a receiver larger than 200 watts p...
P81-2120 cambridge soundworks, inc. 26 dartmouth street, westwood, ma 02090 telephone: 1-800-367-4434 fax: 1-978-475-7219.
