Summary of Playdock Playdock MP3
Page 1
User manual.
Page 2: �������
to prevent fire or shock hazard, do not use this plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure. To prevent fire or shock hazard, do not expose this appliance to rain or moisture. The lightning flash with arrowhead sy...
Page 3
Table of contents compatibility and dimensions ................................. 2 carton contents ......................................................3 the preparation instructions show how to use each of playdock mp3’s four holders with specific mp3 players. Your mp3 player may differ from the pl...
Page 4
Supported mp3 player types product dimensions 244 mm h 180 mm w 261 mm d 9 5/8 in h 11 in w 10 1/4 in d page 2 playback from fitted holder playdock mp3 provides holders and holder inserts to fit the following players: creative© zen players (zen, zen nx, zen xtra, zen touch, zen micro) creative muvo 2...
Page 5
(pre-installed with player) b) large holder c) small player insert (inside large holder) d) usb-style dc connector e) battery (not included with all models) package contents (packed separately) f) 120vac to 13.5vdc power adapter g) mid player insert h) barrel-style dc connector i) zen/nx/xtra holder...
Page 6
Playdock mp3 comes set-up to support creative zen micro and dell pocket dj. If you have one of these play- ers, slip the bottom of the player into the holder from the direction shown by the arrow. Remove the small player insert from the large holder as shown. Connect the dc power plug and the signal...
Page 7
Slide the zen touch or muvo 2 player down into the large holder. Connect the dc power plug and the signal plug into the jacks. Remove the large holder. Unplug the usb-style dc connector. Plug in the barrel-style dc connector. Re-install the large holder. Slip the lip on the underside of the large ho...
Page 8
Slip the bottom of the player into the holder from the direc- tion shown by the arrow. Apple ipod mini-size players unplug usb-style dc connector. Retain for future use. Connect the signal plug into the player’s 3.5 mm head- phone jack. Skip to normal use, page 10 page 6.
Page 9
Remove the small player insert from the large holder as shown. Install the mid-size insert. Unplug usb-style dc connector. Retain for future use. Slip the bottom of the player into the holder from the direc- tion shown by the arrow. The apple© ipod is shown. The dell pocket dj fits in a similar manne...
Page 10
Remove the zen touch holder and small player insert as shown. Creative zen players (zen, zen nx, zen xtra) replace usb dc connector with barrel-style dc connec- tor. Install the zen holder. Slip the lip on the underside of the zen holder under the stage on top of the playdock. Press the claws of the...
Page 11
Page 9.
Page 12
Page 10 normal use connect the ac to dc power adapter. 1) connect power adapter’s dc output plug to playdock dc input. 2) then connect power adapter’s ac plug to ac outlet. 3) put the power button to the in position. Note: if portable operation is not frequent, you can use the play/ mute button to t...
Page 13
After removing player for neat appearance, slip the dc connector and miniplug into the standby sockets. Portable operation with the battery installed, playdock mp3 serves as a stand-alone music system. When the ac power adapter is disconnected, playdock mp3 automatically enters standby mode (the pla...
Page 14
Long term storage with battery if the playdock mp3 will be disconnected from ac power for more than a few weeks, fully charge the battery and put the power switch in the out position. A fully-charged battery can be stored at room temperature (68 degrees f, 20 degrees c) for over nine months. Immedia...
Page 15
...
Page 16
rev 2 playback from fitted holder playdock mp3 provides holders and holder inserts to fit the following players: creative© zen players (zen, zen nx, zen xtra, zen touch, zen micro) creative muvo 2 hard drive players dell© dj, pocket dj apple ipod©-size and ipod mini-size players additio...