Powered subwoofer ii by henry kloss installation and operating instructions © 1995 cambridge soundworks inc..
Contents powered subwoofer ii by henry kloss important—please read first .......................................................... 1 unpacking the system .................................................................... 2 setting low-pass filter frequency ...........................................
Cambridge soundworks 1-800-for-hifi (1-800-367-4434), 8 am to midnight, eastern time in canada: 1-800-525-4434 outside us or canada: tel: 617-332-5936 fax: 617-332-9229 b important – please read first ass drums, organs, and electronic synthesizers are among the very few instruments that produce you ...
2 unpacking and checking for shipping damage 1. Upon unpacking your powered subwoofer ii, please examine it carefully for any signs of shipping damage. If there is evidence of shipping damage, do not discard the shipping carton or its inserts, and do not install or use the powered subwoofer ii, in c...
• 100 hz: this position is appropriate to high-quality systems with less low-bass reach, such as those designed to achieve higher efficiency at the expense of low bass. • 140 hz: this position can be used with small speakers for creating your own satellite- type system. 140 hz is the highest frequen...
Powered subwoofer ii can be placed horizontally or vertically (stick-on feet are provided for attachment once you have decided on its final orienta- tion). It can go most anywhere within the listening room, although we don’t recommend placing it behind the listeners. It can be hidden under or behind...
Note: do not place the subwoofer in shelving that houses a phono turntable. Strong bass from the speaker, including the turntable’s own rumble, could be picked up by the turntable, fed back out the speakers again, picked up by the turntable yet again, and so on. This condition, known as acoustic fee...
Note: make all connections with the powered subwoofer ii switched off. The powered subwoofer ii can be connected one of three ways. Connection method one: con- nect directly to an amplifier or receiver’s speaker output termi- nals using conventional speaker wire (figure 2). This is the easiest way t...
Nals of your main speakers instead of the amplifier or receiver’s speaker output termi- nals. Be sure the speaker wire con- nects the positive (+) terminals of the subwoofer to the positive (+) terminals of the amplifier or receiver (and similarly connects the negative (–) terminals to- gether). All...
If you experience any diffi- culty, don’t hesitate to call the store where you made your purchase, or a cambridge soundworks audio expert. If a problem is confirmed, you will need to return the speaker to that store or its authorized service center. If you purchased the speakers through our mail ord...
This warranty does not extend to any defect, malfunction or failure caused by misuse, abuse, accident, faulty hookup, defec- tive associated equipment or use of the speaker with equipment for which it is not intended. This warranty is valid only when the speaker is returned to an authorized cambridg...
311 needham street, newton ma 02164 1-800-367-4434 fax: 617-332-9229 p81-0551 1195 rev. B c ambridge s ound w orks c ambridge s ound w orks c ambridge s ound w orks c ambridge s ound w orks c ambridge s ound w orks c ambridge s ound w orks c ambridge s ound w orks c ambridge s ound w orks c ambridge...
