Cameo CLPST64TRI3W User manual - Sound Control Mode

SOUND CONTROL MODE

Press the mode button to select Sound Control Mode. The unit will then 

run via the built in microphone. Press Enter ( 2. digit blinks ) to select 

RGB or 7 Colour by using UP and DOWN buttons. Press ENTER ( first 3. 

and then 4. digit blinks ) again to adjust jumping speed ( 00-99 ) by using 

UP and DOWN buttons. 

RGB

00 - 99 sound sensitivity adjustable.

7COLOUR

00 - 99 sound sensitivity adjustable.

SLAVE MODE

Press the MODE button to enter SLAVE MODE.

Link the slave unit and the master unit via DMX cable. The slave unit 

will follow in sequence with the master unit.

DMX ADDRESS SETTING MODE

Press the MODE button to enter DMX ADDRESS SETTING MODE.

Press ENTER to access edit mode (the last 3 figures will blink). Use the 

UP and DOWN buttons to set the DMX address (A001 - A512).

Press ENTER to confirm.

MODE SELECTION:

10

11

IT

ALIANO

POLSKI

ESP

AÑOL

FRANCAIS

FRANCAIS

FRANCAIS

FRANCAIS

FRANCAIS

DEUTSCH

ENGLISH