Cameo CLPSTMINIQ8W User Manual - Auto Mode

AUTO MODE

Press the MODE button to select Auto Mode. The unit changes between 

Colour Jumping Mode and Colour Fading Mode automatically. The colour 

jumping/fading speed can be preadjusted by the speed of the Colour 

Jumping and Colour Fading Modes.

SLAVE MODE

Press the MODE button to enter the Slave Mode.

Link the slave unit and the master unit via DMX cable. The slave unit will 

follow in sequence with the master unit. Press ENTER to confirm.

SOUND CONTROL MODE

Press the MODE button to select Sound Control Mode. The unit will follow 

the beat of the music thanks to the built in microphone. Press ENTER (3. 

and 4. digit blink) again to adjust microphone sensitivity (00-99) by using 

UP and DOWN buttons. Press ENTER to confirm.

DMX MODE SELECTION

Press the MODE button to enter DMX MODE SELECTION (repeatedly if ne-

cessary). Press ENTER (1st digit blinks). Press value UP or DOWN button 

to select the desired DMX Mode. Press ENTER again to confirm. 

DMX ADDRESS SETTING MODE

Press the MODE button to enter DMX Address Setting Mode.

Press ENTER to access edit mode (the last 3 digits will blink). Use the UP 

and DOWN buttons to set the DMX address (A001 - A512). Press ENTER 

to confirm

The LED display automatically turns off after 20 seconds and turns on 

again by pressing any of the 4 buttons.

MODE SELECTION:

10

11

IT

ALIANO

POLSKI

ESP

AÑOL

FRANCAIS

FRANCAIS

FRANCAIS

FRANCAIS

FRANCAIS

DEUTSCH

ENGLISH