Cameo CLSCAN60W User Manual - page 11

REVERSE DISPLAY

Using this function, the characters in the display can be reversed by 180°. 

Press the MODE button and then use the UP and DOWN buttons to select 

the reverse display function ("r d l S" appears in the display). Now press the 

ENTER button and use the UP button to select reverse on (ON) or the DOWN 

button to select reverse off (OFF) 

Confirm with ENTER.

FIXTURE TIME

Using this function, the fixture time can be displayed.

Press the MODE button and then use the UP and DOWN buttons to select 

the fixture time display ("F l t l" appears in the display). Now press the 

ENTER button. The display shows the number of hours for which the unit has 

already been in operation.

RESET

Use this function to start the motor reset process.

Press the MODE button and then use the UP and DOWN buttons to select 

the reset function ("r E s t" appears in the display). Now press the ENTER 

button. The rest process begins and after approx. 20 seconds the motors are 

recalibrated and the unit is operational.

FACTORY DEFAULTS

You can use this function to reset the unit to the factory default settings.

Press the MODE button and then use the UP and DOWN buttons to select 

"LOAd". Now press the ENTER button. All settings (microphone sensitivity, 

reverse display...) have now been reset to the factory defaults. The unit is 

immediately operational again.

NOTE

If one of the 4 buttons is not pushed, the LED display 

switches off automatically after approx. 70 seconds. As soon as one of the 

four buttons is pressed, the display switches on again automatically.

10

11

IT

ALIANO

POLSKI

ESP

AÑOL

FRANCAIS

FRANCAIS

FRANCAIS

FRANCAIS

FRANCAIS

DEUTSCH

ENGLISH