Cameo KLING TILE 144 User Manual - page 17
17
13
MOUNTING RAIL / MONTAGESCHIENE / RAINURE DE MONTAGE / CARRIL DE MONTAJE / SZYNA MONTAŻOWA / GUIDA DI MONTAGGIO
EN
Mounting rail to fit the connection pieces.
DE
Montageschiene zum Anbringen der Verbindungsstücke.
FR
Rainure de montage pour fixation des éléments de liaison.
ES
Carril de montaje donde colocar la pieza de unión.
PL
Szyna montażowa służy do przymocowania elementów łączących.
IT
Guida di montaggio per il fissaggio dei raccordi.
14
CONNECTION PIECES / VERBINDUNGSSTÜCKE / ÉLÉMENTS DE LIAISON / PIEZA DE UNIÓN / ELEMENTY ŁĄCZĄCE / RACCORDI
15
MOUNTING BRACKET / MONTAGEBÜGEL / SUPPORT DE MONTAGE / SOPORTE DE MONTAJE / PAŁĄK MONTAŻOWY / STAFFA DI
MONTAGGIO
OPERATION / BEDIENUNG / UTILISATION / OPERACIÓN / OBSŁUGA / UTILIZZO
EN
NOTE
A few seconds after the spotlight has been correctly connected to the mains, it is ready for use and starts with the mode that was previously select-
ed. After the start, the firmware version appears briefly on the display.
SETTING THE OPERATING MODE (Operating mode)
Use the UP and DOWN buttons to select the “Operation Mode” menu item and confirm by pressing ENTER. The required operating mode can now be
selected as desired by using the UP and DOWN buttons and activated by pressing ENTER. Press MODE to exit the sub-menu.
Operating modes: Manual Mode, DMX Mode, Art-Net Mode, Kling-Net Mode, Slave Mode, Auto Mode.
Operation Mode
Sub-menu items and explanations:
Operation Mode
Manual Mode
Dimmer
000 - 255
Dimmer 0 - 100%
confirm with ENTER
Shutter
000 - 005
Stroboscope deactivated
confirm with ENTER
006 - 255
Strobe (slow -> fast)
confirm with ENTER
Red
000 - 255
Red 0 - 100%
confirm with ENTER
Green
000 - 255
Green 0 - 100%
confirm with ENTER
Blue
000 - 255
Blue 0 - 100%
confirm with ENTER
Color Macro
000 - 255
15 colour macros + colour change + colour fading,
see DMX table 8 CH mode, channel 6
confirm with ENTER
Auto Program
000 - 255
Program 1 -24, see DMX Table, 8 CH Mode, channel 7
confirm with ENTER
Auto Speed
000 - 255
Auto Program speed slow -> fast
confirm with ENTER
DMX Mode
8CH
see DMX tables
confirm with ENTER
432CH
Art-Net Mode
8CH
see DMX tables
confirm with ENTER
432CH
Kling-Net Mode
to start, press ENTER
Slave Mode
to start, press ENTER
Auto Mode
Speed
1 - 9
Program Speed
confirm with ENTER
Program
01 - 29, Mix
Program selection
confirm with ENTER
SETTING THE DMX START ADDRESS (DMX Address)
Use the UP and DOWN buttons to select the “DMX Address” menu item and confirm by pressing ENTER. The required start address can now be se-
lected as desired by using the UP and DOWN buttons and activated by pressing ENTER (DMX Address 001 - 512). Press MODE to exit the sub-menu.
You will find tables with the channels of the different DMX modes in this manual under DMX CONTROL.
DMX Address
001