Sd-hd minizoom camera operation manual.
Sd-hd minizoom – operation manual sd/hd minizoom v3 page 1 of 6 3/2/2013 general the camera system is based around two main components, the camera head unit and the interface unit. It is possible to use the camera head unit independently, but this requires a 6-12v dc supply and the video output prov...
Sd-hd minizoom – operation manual sd/hd minizoom v3 page 2 of 6 3/2/2013 remove power from the unit and set the rotary channel select switch and dip switches back to their normal required settings. Next time power is applied to the interface unit the camera will have the new format. The dip switches...
Sd-hd minizoom – operation manual sd/hd minizoom v3 page 3 of 6 3/2/2013 component video output v ersion 6 interfaces have an additional 9 way ‘d’ male connector on the side of the box. This provides a component video output when hd modes are selected, or an s-video and output when sd modes are sele...
Sd-hd minizoom – operation manual sd/hd minizoom v3 page 4 of 6 3/2/2013 appendix ‘a’ – rcp panel and joystick panel settings note that the rcp pane l should be selected to ‘sony’ camera make, and ‘q-ball’ or ‘q-ball ir’ camera type to control the sd-hd minizoom camera. (note that all sd-hd minizoom...
Sd-hd minizoom – operation manual sd/hd minizoom v3 page 5 of 6 3/2/2013 universal rcp panel - master set-up menus master setup enter password? Camera type channel 1 id 1 make model sony q-ball ir master setup channel 1 id 1 id assignment normal id 5 this main menu select screen can be reached at an...
Sd-hd minizoom – operation manual sd/hd minizoom v3 page 6 of 6 3/2/2013 camera corps sd-hd minizoom camera rcp panel (old style) menus gain col gam shu iris bal dtl ter cam re- type set cue tst rem p&t red grn sw2 mode on off on off cam pwr p&t pwr colour gain & black controls operate pan, tilt, zo...
